Technicolor - Thomson SpeedTouchTM620 manual Basic Navigation, Command group navigation, =help

Chapter 2

SpeedTouch™ Command Line Interface

2.3 Basic Navigation

Command group navigation

From the top level, you can change to a command group by executing the name of the desired command group (for example type the name of the command group and press ENTER).

To obtain a list of all available command groups, use the help command from the top level:

=>:help		are available	:
Following commands
help	:	Displays this	help information
menu	:	Displays menu	help information
?	:	Displays this
exit	:	Exits this shell.
..	:	Exits group selection.
saveall	:	Saves current	configuration.
ping	:	Send ICMP ECHO_REQUEST packets.
traceroute	:	Send ICMP/UDP	packets to trace the ip path.
telnet	:	Open a telnet	connection to a server.

Following command groups are available :
firewall	service	autopvc	connection	cwmp
dhcp	dns	dsd	dyndns	eth
expr	ids	igmp	ip	isdn
adsl	atm	capi	config	debug
env	hostmgr	interface	ipqos	label
language	mbus	memm	mlp	nat
ppp	pptp	rcapi	router	script
sla	snmp	sntp	software	ssh
syslog	system	tunnel	upnp	user
wireless

The exact list of available command groups depends on the type of SpeedTouch™, the number and kind of activated software modules and on the current version of the SpeedTouch™ System software.

To return to top level, or to go up one level (in case of nested command groups), type two dots and press ENTER.

E-DOC-CTC-20051017-0155 v1.0 7