Technicolor - Thomson SpeedTouchTM620 manual SpeedTouch Remote Access

Chapter 8

SpeedTouch™ Remote Access

Configuration via

CLI commands

To have SSH access via WAN, additional configuration of the SSH service is needed.

Use the following CLI command to allow SSH access from the WAN to the SpeedTouch™:

=>:service system ifadd name=SSH group=wan

If you take a look at the SSH service configuration, you will see that the wan group is added to the Interface Access List:

=>:service system list name=SSH expand=enabled
Idx Name	Protocol	SrcPort DstPort Group
----------------------------------------------------------------------
1 SSH	tcp	22
Description		SSH server
Properties		server
Attributes		state port aclip aclif aclifgroup map log
User Managed Attributes....		state aclip aclif aclifgroup map log
Attribute Values :
State		enabled
Port		22
Ip Access List		any
Interface Access List		any
Interface Group Access List lan wan
Map List		22
Logging		disabled

94 E-DOC-CTC-20051017-0155 v1.0