Technicolor - Thomson SpeedTouchTM620 Configuration you saved in is stored in the user.ini file

Chapter 4

SpeedTouch™ Configuration Management

Step	Action
6	Optionally, you can make a listing of the subdirectory’s contents:
	ftp> dir			192.168.1.254
	200 Connected to
	150 Opening data			connection for /bin/ls			1971	start.cmd
	-rwxrwxrwx	1	0	0	20	Jun 29
	-rwxrwxrwx	1	0	0	2952448	Jun 29	1971	ZZUIAA5.314
	-r--r--r--	1	0	0	9	Jun 29	1971	seed.dat
	-r--r--r--	1	0	0	729	Jun 29	1971	sslcert.pem
	-r--r--r--	1	0	0	908	Jun 29	1971	sslkey.pem
	-r--r--r--	1	0	0	692	Jun 29	1971	sshdsa.pem
	-rwxrwxrwx	1	0	0	66920	Jun 29	1971	user.ini
	-rw-rw-rw-	1	0	0	4056	Jun 29	1971	user.tpl
	-rw-rw-r--	1	0	0	34633	Jun 29	1971	security.cfg
	226 Options: -l : 9 matches total
	ftp: 600 bytes		received in 0,00Seconds 600000,00Kbytes/
	sec.ftp: 400	bytes received in 0.01Seconds 40.00Kbytes/sec.
	The configuration you saved in step 2 is stored in the user.ini file.
	Other configuration files (stored via the					:config save and
	:config backup CLI commands) may be found.

7Get the configuration file (in the example the saved configuration file user.ini is backed up):

ftp> get user.ini

200 Connected to 192.168.1.254 port 1693

150 Opening data connection for user.ini (12016)

#####

226 File transfer complete

ftp: 12016 bytes received in 0.02Seconds 600.80Kbytes/sec.

As a result the configuration file, containing a saved SpeedTouch™ configuration will be stored on the location from where you started the FTP session.

34 E-DOC-CTC-20051017-0155 v1.0