Technicolor - Thomson SpeedTouchTM620 manual Starting the SLA Traceroute

Chapter 12

SLA Monitoring.

Parameter	Description	Values
maxfail	The max number of	number{0-255}
	consecutive timeouts allowed
	before terminating a
	traceroute request
bypassrt	Enables bypassing of the	disabled or enabled
	normal routing tables.
dffield	Enables setting of the don't	disabled or enabled
	fragment flag in the IP headers
	of the traceroute requests.
dsfield	The value to store in the	number{0-255
	Differentiated Service Field in
	the IP packet.

Use the following command to modify the SLA traceroute parameters:

=>:sla traceroute modify test = route

[addr] = 11.0.0.138

[size] = 0 [timeout] = 3 [probePerHop] = 3 [port] = 33434 [maxTtl] = 30 [initTtl] = 1 [createHopEntries] = disabled [frequency] = 0

[maxrow] = 50

[storagetype] = nonVolatile [trap] =

[type] = UdpEcho [descr] = [srcaddr] = 0.0.0.0 [intf] = none [maxfail] = 5 [bypassrt] = disabled [dffield] = disabled

[dsfield] = 0

:sla traceroute modify test=route =>

Starting the SLA Traceroute

The SLA traceroute process has been configured now. You now need to start the process, to do so, use the following command:

=>:sla traceroute start test=route =>

E-DOC-CTC-20051017-0155 v1.0 199