Technicolor - Thomson SpeedTouchTM620 manual Transfer the configuration file to the SpeedTouch

Chapter 4

SpeedTouch™ Configuration Management

Transfer the configuration file to the SpeedTouch™

To transfer a SpeedTouch™ configuration file stored on your local disk to the

SpeedTouch™, proceed as follows:

Step				Action
1	Open an FTP session to the SpeedTouch™. At the user name prompt,
	enter a user name and at the password prompt, the password (refer
	to “The SpeedTouch™ Multi Level Access Policy Configuration
	Guide” for more information).
2	If required, save the current SpeedTouch™ configuration via the
	quote site saveall command:
	ftp> quote site saveall
	200-
	200 CLI command "saveall" executed
3	Enter binary file transfer mode. Optionally you can enable hashing:
	ftp> bin
	200 TYPE is now 8-bit binary
	ftp> hash
	Hash mark printing On ftp: (2048 bytes/hash mark).
4	Go to the SpeedTouch™ ‘/dl’ subdirectory:
	ftp> cd dl
5	You can check whether a user.ini configuration file, or other
	configuration files are stored in the ‘/dl’ subdirectory by making a
	listing of the subdirectory’s contents:
	ftp> dir
	200 Connected to 192.168.1.254
	150 Opening data connection for /bin/ls				1971 start.cmd
	-rwxrwxrwx	1 0	0	20 Jun 29
	-rwxrwxrwx	1 0	0	2952448 Jun 29	1971 ZZUIAA5.314
	-r--r--r--	1 0	0	9 Jun 29	1971 seed.dat
	-r--r--r--	1 0	0	729 Jun 29	1971 sslcert.pem
	-r--r--r--	1 0	0	908 Jun 29	1971 sslkey.pem
	-r--r--r--	1 0	0	692 Jun 29	1971 sshdsa.pem
	-rwxrwxrwx	1 0	0	66920 Jun 29	1971 user.ini
	-rw-rw-rw-	1 0	0	4056 Jun 29 1971 user.tpl
	-rw-rw-r--	1 0	0	34633 Jun 29	1971 security.cfg
	226 Options: -l		: 9 matches total
	ftp: 600 bytes received in 0,00Seconds 600000,00Kbytes/
	sec.ftp: 400 bytes received in 0.01Seconds 40.00Kbytes/sec.
6	In case the configuration file you intend to upload has the same
	name as (one of) the configuration file(s) on the SpeedTouch™ file
	system (for example user.ini), you must either:
	Rename the file name, of the configuration file stored on your
	local disk
	Delete the file from the SpeedTouch™ file system.
7	Optionally you can clean up the SpeedTouch™’s file system via the
	:software cleanup CLI command:
	ftp> quote site software cleanup
	200-
	200 CLI command "software cleanup" executed

36 E-DOC-CTC-20051017-0155 v1.0