Technicolor - Thomson SpeedTouchTM620 manual Remote Sftp Access, =ssh config sftp=enabled

Chapter 8

SpeedTouch™ Remote Access

8.6 Remote SFTP Access

SFTP Introduction SSH is to be used to establish privacy between 2 network devices. It provides a secured layer on top of TCP/IP.

SFTP allows privacy during file transfer sessions.

SSH authentication The SpeedTouch™ supports the following authentication methods:

password	Password Authentication
publickey	Public Key Based Authentication

The user can configure the authentication to be used during SSH session setup, this can be done by executing the following CLI command:

=>:ssh config auth=password

By choosing 'password', authentication is based on username / password.

By choosing 'public_key', authentication is based on public key, searching in the database of installed public keys on the SpeedTouch™.

Enableing SFTP The Secure Shell service can be enabled by executing the following CLI command:

=>:ssh config sftp=enabled

100 E-DOC-CTC-20051017-0155 v1.0