Technicolor - Thomson SpeedTouchTM620 manual How to Create an Address Based Filter

Chapter 6

SpeedTouch™ System Services

6.3.5 How to Create an Address Based Filter

How to Create a New Proceed as follows:

Entry

Step	Action
1	Go to the SpeedTouch™ configuration home page
2	In the Toolbox section, click Web Site filtering.
3	In the top right corner, click Configure.
4	Go to the first bullet in the list (Address Based Filtering).
5	In the last row of the table, enter the URL of the web site for which you
	want to create an entry in the filter
6	Select the action to be taken (Block, Allow or Redirect)
	In case of Redirect, enter the address to which you want to redirect.
7	Click Add
8	Repeat steps 5 to 7 for each entry you want to create in the filtering
	table.
9	If necessary, select Use Address Based Filter and click Apply.

How to Modify an Entry Proceed as follows to modify an entry in the filter table:

Step Action

1Go to the row you wish to change and click the corresponding Edit.

2Modify the entry and click Apply. To undo the changes, click Cancel.

How to Delete an Entry Proceed as follows to delete an entry in the filter table:

Step Action

1Go to the row you wish to delete

2Click the corresponding Delete.

E-DOC-CTC-20051017-0155 v1.0 67