Technicolor - Thomson SpeedTouchTM620 How to Configure the Traps, Use the snmp notify add command

Chapter 10

SpeedTouch™ Monitoring

10.2.12 How to Configure the Traps

Procedure In order to configure which traps are sent where, you need to:

Step	Action
1	Set the message handling parameters
2	Create a notify filter
3	Create a notify profile using that filter
4	Create notify tags
5	Create a destination for the traps
6	Enable traps

If you simply want all tags to be sent, steps 2, 3 and 4 are not necessary.

How to Set the	Use the :snmp targetparams add command.
Message Handling	Example:
Parameters
	:snmp targetparams add paramname=Trap_params mpmodel=v1
	securitymodel=snmpv1 securityname=RWCommunity
	securitylevel=noAuthNoPriv

How to Create a Notify Filter

How to Create a Notify Profile Using that Filter

How to Create

NotifyTags

Use the :snmp notifyfilter add command.

Example:

:snmp notifyfilter add profilename=Trap_profile subtree=iso

Use the :snmp notifyprofile add command.

Example:

:snmp notifyprofile add paramname=Trap_params profilename=Trap_profile

Use the :snmp notify add command.

Example:

:snmp notify add name=trap_notify_test tag=Trap_tag

158 E-DOC-CTC-20051017-0155 v1.0