Technicolor - Thomson SpeedTouchTM620 manual Configuration via CLI commands

Configuration via CLI commands

Chapter 8

SpeedTouch™ Remote Access

To have HTTPs access via WAN, additional configuration of the HTTPs service is needed.

Use the following CLI command to allow HTTPs access from the WAN to the SpeedTouch™:

=>:service system ifadd name=HTTPs group=wan =>

If you take a look at the HTTPs service configuration, you will see that the wan group is added to the Interface Access List:

=>:service system list name=HTTPs expand=enabled

Idx NameProtocol SrcPort DstPort Group

-----------------------------------------------------------------------

1 HTTPs	tcp		443
Description	...............	HTTP web server over ssl
Properties		server
Attributes		state	port aclip aclif aclifgroup map log
User Managed Attributes...		state	port aclip aclif aclifgroup map log

Attribute	Values :	enabled
State
Port	List	443
Ip Access		any
Interface	Access List	any
Interface	Group Access List lan wan
Map List		443
Logging		disabled

=>

E-DOC-CTC-20051017-0155 v1.0 85