Technicolor - Thomson SpeedTouchTM620 manual Enabled or disabled

Chapter 9

The Integrated SpeedTouch™ ISDN Modem

CLI Parameters: The table below provides a description of the relevant parameters:

Parameter	Value	Description
intf	text string	name of the ISDN interface
number	numeric	Dial-in number for the ISDN line
mlppp	enabled or disabled	Enable or disable multilink ppp. This
		means that the ppp can be
		established over 1 or 2 ISDN B links
		(64 kbps), thus creating a bandwidth
		of either 64 or 128 kbps
BODStart	Numerical (in kbps)	If multilink ppp is enabled and the
	Default: 40	required bandwidth exceeds this
		value, a second ISDN B link is used
		for the ppp connection
BODEnd	Numerical (in kbps)	If multilink ppp is enabled and the
	Default: 38	required for it drops below this
		value, the second ISDN B link in the
		ppp connection is dropped.
mode	dialout	SpeedTouch™is set for dialout. This
		value is mandatory.
callback	enabled or disabled	Enable or disable callback. Note that
		the dial-in end must also be set for
		callback if you enable it.

120 E-DOC-CTC-20051017-0155 v1.0