JVC VR 601 instruction manual RJ-45 PIN configuration for LAN Hub, Connect to WAN Internet

RJ-45 PIN configuration for LAN Hub

PIN NO.	PIN Assignment
1.	TX +	RJ-45 socket
2.	TX -
3.	RX +
4.	Not Connected
			1 2 3 4 5 6 7 8
5.	Not Connected
6.	RX -
7.	Not Connected
8.	Not Connected

12.1.3Connect to WAN (INTERNET)

The RJ-45 PIN configuration for connecting to a WAN is the same as connecting to a LAN.

			SD Card
	FROM MUX
VIDEO	MAIN MONITOR
		AUDIO	RS-485
	IN	IN
		ETHERNET	RS-232
		10/100
	OUT	OUT
TO	TO		ALARM	I/O
MUX'S VCR IN					DC12V
	MONITOR
			RJ-45

12.2 Configure Your DVR Network Settings

Upon network hardware connection, you need to activate the network function and configure the proper network settings of the DVR.

12.2.1 Enable DVR Network Function

MAIN MENU

RECORD

ALARM

CLOCK / TIMER

COMMUNICATION

DISK

SYSTEM

GOTO COMM PAGE

COMM SETTING

COMM ID	: 01
RS232	: ON
RS485	: ON
NET ENABLE	: ON
NET DHCP	: OFF
NET IP	: SET
FTP SETTING

MAIN PAGE ETHERNET ENABLE

Press the Setup button to enter the MAIN MENU. Please use the“<” “>” buttons and to highlight COMMUNICATION; then press the Enter button to enter

the COMM SETTING page.

Use the “^” “v” buttons	and to highlight NET ENABLE; select ON. Then
press the Enter button	to proceed.

*About the location of the buttons, please refer to Page 10 2.1 Front View.

73