Alarm Recording, Externally triggered Recording | JVC VR 601

4.2.3 Alarm Recording

Take the following steps to activate the programmed alarm recording. For ALM OPERATION, REC RATE, REC QUALITY, AUDIO, ALM TYPE, ALM DURATION, and PRE-ALARMsettings, please refer to section 5.2 for more details.

(1)Press the Setup button to enter the MAIN MENU.

(2)Select ALARM and press the Enter button to enter the ALARM SETTING.

(3)Set the desired REC RATE, REC QUALITY, ALM TYPE, and ALM DURATION for use. If audio is required, set AUDIO to ON. If pre-alarm recording is required, set PRE-ALARM to ON.

(4)To activate the alarm recording, set ALM OPERATION to ON. To deactivate it, set ALM OPERATION to OFF.

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO ALARM PAGE

ALARM SETTING

ALM OPERATION		: OFF
REC RATE		: 20F/S
REC QUALITY		: BEST
AUDIO		: OFF
ALM TYPE		: NO
ALM DURATION		: 0 SEC
PRE- ALARM		: OFF
MAIN PAGE
ALARM REC ENABLE

4.2.4 Externally triggered Recording

By connecting the RECORD IN of ALARM I/O on the rear panel of the DVR, you can activate/deactivate the recording function of a DVR. The file will be kept with a prefixed “R”. Please refer to section 2.3 for more details.

*About the location of the buttons, please refer to Page 10 2.1 Front View.

28

Image 28

JVC VR 601 Alarm Recording, Externally triggered Recording, REC Quality Best Audio OFF ALM Type ALM Duration

Contents

Digital Video Recorder Important Safeguards Safety Precautions for USA and Canada Avertissement Power System For Your Safety AustraliaImportant In the United Kingdom Mains Supply AC 230 Connection to the mains supply Place of storage and use About the provided power cables for VR-601 UHandling the unit Important Safety Instructions AC adapter section Table Of Contents Specifications Compatible Multiplexers Product Features Product Introduction Front View Hard-disk drive compartmentHard-disk compartment lock Operate button Rec Indicator Disk IndicatorOperate Indicator Up / Down buttons Mobile Rack Power LED Mobile Rack HDD LED Rear View This Figure is Looked from the Rear Alarm In/OutNo Connection Connectiong to the AC Adapter Basic ConnectionMemo Connecting with a Single Camera Connecting with a Multiplexer Connecting with a Quad Multiplexer Attaching AN External Device to DVR Clock SET Hard-Disk Drive Installation Maxtor Quality Best Ntsc Rate 6 HR System InformationMUX OFF Size POS Updating System Software Configuring Recording Settings BestHigh Standard Ntsc MUX OFF PAL MUX OFF Recording Operations Timer RecordingManual Recording Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 Alarm Recording PRE- Alarm OFF Main Alarm REC EnableExternally triggered Recording REC Quality Best Audio OFF ALM Type ALM Duration Diagrams below Operation Status From REC mode to Playback mode Playback OperationsFast Forward/Reverse Search to play back a particular recorded video Slow Forward/Reverse You can also operate by using button and buttonPlay Back Picture-by-picture Search Full List Alarm List Time Search Thumbnail SD Card Search OperationsPlay Back Recorded Video from a HDD of the mobile rack Full List Search Alarm list Search Alarm ListTime Search Search Search Thumbnail Year Full List Thumbnail Search2003 SD Card Search Backup Operations Mobile Rack HD BackupBackup Backup Main SET HD2 Usage Alarm Select Main Backup ALL to HD2 Alarm Select Main Backup Alarm to HD2 Disk Setting Reformat HD2 UsageSearch button 1220 2001-02-01 0330 2001-03-02 0420 1330 Security Digital Card SD Card Backup Backup the System setting info into SD CardSave the whole setting into the SD card Archive Single image Clips into SD Card Transfer the system setting info of DVR to another Key Lock Operation Menu Setup REC Setting REC Quality Alarm Setting REC Quality PRE- Alarm Clock / Timer Clock / Timer SET REC Enable OFF Main Timer REC EnableTimer REC Schedule NET Enable NET Enable OFF NET Dhcp NET IP SET FTP Setting MainCommunication Comm Setting FTP Setting Comm ID EnableREC Mode Alarm REC REC Mode Password FTP Account FTP IPUser Path Disk Setting Backup Full Main Disk REFORMAT/CLEARBackup HD HD2 Usage Backup System Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 General Command Format SetupCommunication Protocol Value of a specific front panel key Request Time Second Category=0x02 Set Time Second Category=0x02Request State Second Category=0x06 Description of System State Mobile Rack Installation Jumper settings of hard-disk drives for the system LocationPage Push the active-handle inward Lock the Key System Default Disk Setting Reformat SET RS232 / RS485 D Message Meanings Network Viewer PIN noPage View the VR-601 video from a remote PC Viewing images View all the connected devices Function Buttons Description View single device Playback function bar Change the Record & Timer Properties Via the Network Set the regular record settingsSet the Alarm record settings Set the record timer Archive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remaining Physical specification of RJ-45 cable for Ethernet Cable ConnectionsConnect to a computer Connect to a LAN Hub Intranet RJ-45 PIN configuration for LAN Hub Configure Your DVR Network SettingsEnable DVR Network Function Connect to WAN Internet Enable Dhcp Function Set IP Address 12.3 TCP/IP Communication Software Page 12.5 TCP/IP Configuration setting 12.4 TCP/IP installationClick Start Settings Control Panel Network Connection Testing Click Start Programs MS-DOS PromptPage Design and specifications subject to change without notice Model Number VR-601 U VR-601 E Manufacturer Model Channel ColorsDecode on DVR Viewer