Network Viewer, PIN no | JVC VR 601 specification

10. Network Viewer and Image Viewer

This section provides instructions for installing and using the Network Viewer, and Image Viewer, which are included with the VR-601. The programs can be operated by a selected PC equipped with the following requirements.

1.Intel Pentium 233MHz at least.

2.32 MB RAM

3.Window 95, 98, NT, ME, 2000 and XP.

4.4 MB Video card capable of 24-bit true color display.

5.5 MB free hard-disk space for software installation.

6.10-base T network for LAN operation.

10.1The Network Viewer

10.1.1Introduction to Network Viewer

The Network Viewer allows you to potentially access 16 units of the VR-601 from a remote desktop or a laptop in a TCP/IP networking environment. It can perform the following functions.

View live images from the VR-601

Store, search, and review recorded video from the VR-601 HDD. Change the regular record, event record, and timer properties.

Before you are ready to view images from a desktop, you need to have your VR-601 networked by obtaining a 10 base Ethernet data cable (Standard RJ-45) to connect the VR-601 to your LAN/WAN. Now enter the main menu to set the IP address.

RJ-45

VR-601

RJ-45 PIN configuration for Ethernet

PIN NO.	PIN Assignment
1.	TX +
2.	TX -
3.	RX +
4.	Not Connected
5.	Not Connected
6.	RX -
7.	Not Connected
8.	Not Connected

PC

RJ-45 socket

1 2 3 4 5 6 7 8

62

Image 62

JVC VR 601 instruction manual Network Viewer, PIN no

Contents

Digital Video Recorder Important Safeguards Safety Precautions for USA and Canada Avertissement Important In the United Kingdom Mains Supply AC 230 Power SystemFor Your Safety Australia Connection to the mains supply Handling the unit About the provided power cables for VR-601 UPlace of storage and use Important Safety Instructions AC adapter section Table Of Contents Specifications Compatible Multiplexers Product Features Product Introduction Hard-disk compartment lock Front ViewHard-disk drive compartment Operate button Operate Indicator Rec IndicatorDisk Indicator Up / Down buttons Mobile Rack Power LED Mobile Rack HDD LED Rear View No Connection Alarm In/OutThis Figure is Looked from the Rear Memo Basic ConnectionConnectiong to the AC Adapter Connecting with a Single Camera Connecting with a Multiplexer Connecting with a Quad Multiplexer Attaching AN External Device to DVR Clock SET Hard-Disk Drive Installation Maxtor MUX OFF Size POS System InformationQuality Best Ntsc Rate 6 HR Updating System Software High Configuring Recording SettingsBest Standard Ntsc MUX OFF PAL MUX OFF Manual Recording Timer RecordingRecording Operations Start END 0000-0000 M 0000-0000 W 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 0000-0000 Externally triggered Recording Alarm RecordingPRE- Alarm OFF Main Alarm REC Enable REC Quality Best Audio OFF ALM Type ALM Duration Diagrams below Fast Forward/Reverse Operation Status From REC mode to Playback modePlayback Operations Search to play back a particular recorded video Play Back Picture-by-picture You can also operate by using button and buttonSlow Forward/Reverse Play Back Recorded Video from a HDD of the mobile rack Search Full List Alarm List Time Search Thumbnail SD CardSearch Operations Full List Search Time Search Alarm list SearchAlarm List Search 2003 Thumbnail SearchSearch Thumbnail Year Full List SD Card Search Backup Backup Main SET HD2 Usage Backup OperationsMobile Rack HD Backup Alarm Select Main Backup ALL to HD2 Search button Alarm Select Main Backup Alarm to HD2Disk Setting Reformat HD2 Usage 1220 2001-02-01 0330 2001-03-02 0420 1330 Save the whole setting into the SD card Security Digital Card SD Card BackupBackup the System setting info into SD Card Archive Single image Clips into SD Card Transfer the system setting info of DVR to another Key Lock Operation Menu Setup REC Setting REC Quality Alarm Setting REC Quality PRE- Alarm Timer Clock / TimerClock / Timer SET REC Enable OFF Main Timer REC Enable REC Schedule Communication NET Enable OFF NET Dhcp NET IP SET FTP Setting MainNET Enable REC Mode Alarm REC Comm Setting FTP Setting Comm IDEnable REC Mode User PasswordFTP Account FTP IP Path Backup HD HD2 Usage Disk SettingBackup Full Main Disk REFORMAT/CLEAR Backup System Situation MAC 00 0c 0c 00 00 Bios SW 1.00J Date Jun 9 Communication Protocol SetupGeneral Command Format Value of a specific front panel key Request State Second Category=0x06 Request Time Second Category=0x02Set Time Second Category=0x02 Description of System State Mobile Rack Installation Jumper settings of hard-disk drives for the system LocationPage Push the active-handle inward Lock the Key System Default Disk Setting Reformat SET RS232 / RS485 D Message Meanings Network Viewer PIN noPage View the VR-601 video from a remote PC Viewing images View all the connected devices Function Buttons Description View single device Playback function bar Set the Alarm record settings Change the Record & Timer Properties Via the NetworkSet the regular record settings Set the record timer Archive Images to the Computer Image Viewer 12-02-02 01-30-03 Lists 2999 02-03-03 3000 02-08-03 Point stops recording Previously recorded data remaining Connect to a computer Physical specification of RJ-45 cable for EthernetCable Connections Connect to a LAN Hub Intranet Enable DVR Network Function RJ-45 PIN configuration for LAN HubConfigure Your DVR Network Settings Connect to WAN Internet Enable Dhcp Function Set IP Address 12.3 TCP/IP Communication Software Page Click Start Settings Control Panel Network 12.4 TCP/IP installation12.5 TCP/IP Configuration setting Connection Testing Click Start Programs MS-DOS PromptPage Design and specifications subject to change without notice Model Number VR-601 U VR-601 E Decode on Manufacturer Model ChannelColors DVR Viewer