JVC VR 601 instruction manual Connecting with a Single Camera, Connecting with a Multiplexer

CONNECTING WITH A SINGLE CAMERA

Please set the MULTIPLEXER option to OFF on the REC SETTING page in the setup menu when it is connected with a single camera. (Please refer to section 5.1 MULTIPLEXER option)

Camera
			SD Card
VIDEO		FROM MUX
	MAIN MONITOR
		AUDIO	RS-485
	IN	IN
		ETHERNET	RS-232
		10/100
	OUT	OUT
TO		TO	ALARM	I/O	DC12V
MUX'S VCR IN		MONITOR

Monitor

CONNECTING WITH A MULTIPLEXER

To match the multiplexer’s recording speed, please set the MULTIPLEXER option to ON on the REC SETTING page in the setup menu when it is connected with a multiplexer. (Please refer to section 5.1 MULTIPLEXER option)

Caution: When being set up so that an multiplexer may record only the Alarm-in camera during alarm record, or when there is only one camera input, if it is going to see the playback picture of VR-601 with the monitor out of multiplexer, the picture may not update. Before beginning record for the multiplexer in the case of usage, the playback picture can update normally by setting REC RATE to 60F/S.

16