3.2 Hard-Disk Drive Installation

The DVR is equipped with two compartments of hard-disk drive. The unit usually comes with one hard-disk drive installed in the compartment HD1, which is default-configured as a master. If you need a second hard-disk drive to be installed in the compartment HD2 (Mobile), please contact your distributors or installers for specific instructions on how to install it. Please don’t serve yourself before consulting your installers. If there is only one hard-disk drive in the mobile compartment, please set the HD2 USAGE option to REC (Please refer to section 5.5) before proceed recording function. The jumper-settings arrangement of installed hard-disk drives for the system (Table 3.2 A.) is shown in the tables below.

Table 3.2 A. The jumper settings of hard-disk drives in the system

 

Location

Jumper

IDE 1

Compartment HD 1

Master (Default)

IDE 2

Compartment HD 2

Master

 

 

 

Table 3.2 B. Compatible hard-disk drives

Manufacturer

Model

Capacity

Rotation

 

Seagate

ST380020A/P

80GB

5400 RPM

 

 

ST340810A/P

40GB

5400 RPM

 

Maxtor

4A160J0-1A

160GB

5400 RPM

 

 

 

 

 

 

 

4R080L0-1

80GB

5400 RPM

 

 

 

 

 

 

 

6Y120L0-1

120GB

7200 RPM

 

NOTE: Hard-disk drives not shown on this list have not been tested by the engineering team and are not recommended for use with this product. For the latest updated list on the recommended hard-disk drives, please contact your dealers or distributors.

19

Page 19
Image 19
JVC VR 601 instruction manual Hard-Disk Drive Installation, Maxtor