Technicolor - Thomson SpeedTouchTM620 About CLI Diagnostics, Accessing the CLI, Diagnostical CLI

Chapter 11

SpeedTouch™ Advanced Diagnostics

11.3.1 About CLI Diagnostics

Introduction	This section describes some of the diagnostics available from the SpeedTouch™
	Command Line Interface (CLI).
	For a full description of the CLI commands see the “SpeedTouch™ CLI Reference
	Guide” for more information.
Accessing the CLI
	You can access the CLI through:
	The SpeedTouch™ CLI Web Interface
	A Telnet session
	The serial Console interface
	See “2 SpeedTouch™ Command Line Interface” on page 5 for more information.
Diagnostical CLI
	Most CLI command groups feature one or more diagnostical commands. this
commands	chapter provides a brief description of these commands.
	For a full description, refer to the “SpeedTouch™ CLI Reference Guide”.

Traces The following CLI commands feature traces:

adsl config	grp config
connection appconfig	grp rip config
connection debug	hostmgr config
cwmp traceconfig	ids config
dhcp client debug traceconfig	ip debug traceconfig
dhcp relay debug traceconfig	isdn debug traceconfig
dhcp server debug traceconfig	label modify
dns client config	label rule debug traceconfig
dns server config	mlp debug traceconfig
dyndns modify	mlp import
firewall debug traceconfig	nat config
firewall rule debug traceconfig	ppp ifconfig

180 E-DOC-CTC-20051017-0155 v1.0