Technicolor - Thomson SpeedTouchTM620 manual Chapter

Chapter 7

The SpeedTouch™ File System

File types Following file types can be found:

System software files (e.g. ZZUIAA5.321)

The SpeedTouch™ system software file. The one in the ‘/active’ directory is currently used by the SpeedTouch™; the one in the ‘/dl’ directory is dormant.

Software activation keys(e.g. VPN256-32.swk)

Software key files allowing the SpeedTouch™ to enable the corresponding software module at startup. Per enabled software module, a software key must be present in the ‘/dl’ directory.

Configuration files (e.g. user.ini)

The most recent saved configuration of the SpeedTouch™, or alternative dormant configuration files, manually stored on the SpeedTouch™. At start-up the SpeedTouch™ will load the user.ini configuration file residing in the ‘/dl’ directory.

Default configuration files (e.g. isp.def)

Depending on your ISP’s or network administrator’s preferences, your SpeedTouch™ may have a deviant default configuration after a reset. The isp.def file, if present, reflects this deviant default configuration.

Template files (e.g. custom.tpl)

Service template file, used by the embedded Easy Setup wizard.

Language-pack files (e.g. German.lng)

Files, allowing to view the SpeedTouch™ Web Interface in a local language. Per

selectable language a language pack file should be available.

Secure storage files (e.g. ss_p12.dat)

Secure storage data files, containing certificate information for the

SpeedTouch™ IP Security VPN module (if enabled).

Flag and system files (e.g. build.flg, config.inf, start.cmd)

Protected files, created by the SpeedTouch™ for file system and startup management. For proper operation, do not change or delete these files in any way.

Script files (.sts)

78 E-DOC-CTC-20051017-0155 v1.0