Before assembling vacuum, check the PACKING LIST on the cover of the separate Repair Parts List_ Use this list to verify that you have received all the components of your new Kenmore vacuum.
R WARNING
Electrical Shock Hazard
Do not plug into the electrical sup-
ply until the assembly is complete. Failure to do so could result in elec-
trical shock or injury.
HANDLE ASSEMBLY
Remove the screw located just below the
top edge of the back of the vacuum.
Position the handle as shown in the illustra- tion below,
While holding the power cord out of the way, slide the handle into the opening at the top of the vacuum°
Hand_
Handle
Screw
Hole
Insert the screw so it passes through the handle into the vacuum°
Begin to tighten the screw with your fingers. It may be necessary to adjust the handle slightly,
