Remove the agitator to check for string and hair
NOTE: In order to keep cleaning efficiency high and to prevent damage to your vacu- um, the agitator must be cleaned every t!me the be!t is changed°
The agitator must also be cleaned accord- ing to the following schedule:
Vacuum Use | Clean | Agitator | ||
HEAVY | - |
| every | week |
(used | daily) |
|
| |
MODERATE | - | every | month | |
(used | times!week) |
|
| |
LIGHT | - |
| every | 2 months |
(used | 1time/week) |
|
| |
Cut off any carpet pile, hair or lint entangled around the agitator and remove any string or debris located near the end
Capcaps..
TO REPLACE BELT:
Loop the new belt on the motor shaft..
NOTE: Use Belt
Shaft
"'New
Belt
Belt
Pulley
Loop the other end of the belt on the belt pulley on the agitator.
Insert the agitator by placing the rounded portion of the end cap down into the slot in the nozzle base_
Cap
Slot
AgitatorNozzle
Base
Press firmly, checking to see that each end is completely inserted°
/
Check to see that the belt is centered on the belt pulley and that the agitator turns freely°
Nozzle
Cover
\
Nozzle Cover
Retainers
Make sure the nozzle cover retainers are in
the UNLOCK position_ Hook the front of the nozzle cover on to the nozzle base and
rotate downward. Once in place, rotate the
nozzle cover retainers to the LOCK position°
17
