Kenmore 116.31721 owner manual CAuTI0, Rounding plastic parts

SOME MODELS

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting.

Disconnect electrical supply_

To access the light bulb, remove the screw which secures the light lens to the vacuum., Remove the lens,

Screw	Push Here
\'..	To Remove

Remove the light bulb by pushing the bulb in while turning counterclockwise to release from the slot. Pult the light bulb straight ouL

\

!• cAuTI0"

Do not use a bulb rated over 130 V

AC-15W. During extended use, heat from the bulb could overheat sur-

rounding plastic parts.

To replace the light bulb, carefully insert and turn clockwise to fit securely into sloL

NOTE: Use Bulb #20-5240° In Canada, 20- 40600_

not plug in,ONor turn on untilcom- I

ely reassembled.

Position the light lens back on the vacuum, Replace the light lens screw_

19