!• WARNING
Electrical Shock Or Personal Injury Hazard
Disconnect electrical supply before servicing or cleaning the unit. Failure to do so could result in elec- trical shock or personal injury from cleaner suddenly starting,
Frequently check and remove hair, string and lint
up becomes excessive, foIIow the steps below. Should the belt become loose or
should it break, follow the Belt Removal Instructions.
TO REMOVE NOZZLE COVER:
Disconnect electrical supply..
To protect the floor surface, always place paper under the nozzle any time the nozzle cover is removed.
Release the nozzle cover by rotating the nozzle cover retainers to the UNLOCK
position. Rotate upward and lift up on the nozzle cover to remove it from the nozzle
base.
Nozzle
Cover
\
Carefully remove any residue that may exist in the belt area_
!• WARNING......
Personal Injury Hazard
Always unplug the vacuum cleaner before cleaning the brush area as agitator may suddenly restart.
Failure to do so can result in per- sonal injury,
TO REMOVE BELT/CLEAN AGITATOR:
Agitator
Position hands on the agitatorr If the belt is still attached to the agitator, there will be tension on ito
Carefully lift the right end of the agitator and then lift the left end.
Remove the worn or broken belt from the motor drive shaft_
Personal Injury Hazard
Be careful when removing the agita- tor as the belt tension is high. Failure to do so could result in per- sonal injury from the agitator releas- ing quickly and snapping away,
16
