Technicolor - Thomson SpeedTouchTM620 manual Pap , chap or auto, Cidr , dotted or none

Chapter 9

The Integrated SpeedTouch™ ISDN Modem

CLI Parameters: The table below provides a description of the relevant parameters. Do not alter the default value of the parameters not shown in this table:

Parameter	Value	Description
intf	text string	name of the PPP interface
dest	text string	name of the ISDN interface on which
		the PPP connection is built
user	text string	Username needed for the PPP
		connection
password	text string	Password needed for the PPP
		connection
auth	pap, chap or auto	Sets the authentication protocol
restart	enabled or disabled	Enable or disable the retry function.
		This means that the system will try
		again if establishing the link fails.
retryinterval	numeric	If the connection fails, and restart is
		enabled, the system will retry
		establishing the connection after this
		interval.
passive	enabled or disabled	Enable or disable passive mode
silent	enabled or disabled	Enable or diable silent mode
echo	enabled or disabled	Enable or disable echo
mru	numeric
ladrress	IP address	Local IP address of the PPP
		connection. This is completed
		automatically when establishing the
		connection. Do not fill it in manually.
radress	IP address	Remote IP address of the PPP
		connection. This is completed
		automatically when establishing the
		connection. Do not fill it in manually.
netmask	Format depends on	Netmask for the ppp connection.
	the format setting	This is completed automatically
		when establishing the connection.
		Do not fill it in manually.
format	cidr, dotted or none	Set the format of the netmask to cidr
		or dotted , or use no netmask.
savepwd	enabled or disabled	Save the pasword. After establishing
		the ppp link for the first time, you no
		longer need to provide it for
		subsequent connections.

122 E-DOC-CTC-20051017-0155 v1.0