Technicolor - Thomson SpeedTouchTM620 manual =sla ping start test=internet =, =sla ping list

Chapter 12

SLA Monitoring.

Use the following command to modify the SLA ping parameters:

=>:sla ping modify test = internet [addr] = 11.0.0.138

[size] = 200 [timeout] = 3 [count] = 15 [datafill] = test [frequency] = 2 [maxrow] = 50 [storagetype] = nonVolatile [trap] = [trapprobefilter] = 2 [traptestfilter] = 12 [type] = IcmpEcho

[descr] =

[srcaddr] = 0.0.0.0 [intf] = lan1 [bypassrt] = disabled [dsfield] = 0

:sla ping modify test=internet size=200 count=15 datafill=test frequency=2 trapprobefilter=2 traptestfilter=12 intf=lan1

=>

Starting the SLA Ping The SLA Ping process has been configured now. You now need to start the process, to do so, use the following command:

=>:sla ping start test=internet =>

SLA Ping Result Now that the SLA ping process has been started you can view the SLA ping results.

Use the following command:

=>:sla ping list

internet : [owner = modem] dest = 11.0.0.138 size = 200 timeout[s] = 3 count = 15 datafill = test

frequency[s] = 2 maxrows = 50 trapflag =

probefailfilter = 2 testfailfilter = 12 type = IcmpEcho storagetype = nonVolatile descr =

srcaddr = 0.0.0.0

intf = wan1 bypassrt = no dsfield = 0

result Info

status = in progress

minrtt[us] = 1104 maxrtt[us] = 8910 avgrtt[us] = 5006 rttsumofsqr[ms] = 130 responses = 4 sentprobes = 4 lastgoodresponse = 02/01/70 04:33:00.306942

=>

E-DOC-CTC-20051017-0155 v1.0 195