Technicolor - Thomson SpeedTouchTM620 Syslog via the CLI, Syslog CLI command group, =syslog help

Chapter 10

SpeedTouch™ Monitoring

10.3.3 Syslog via the CLI

The Syslog CLI command group

The SpeedTouch™ CLI syslog command group basically provides the same possi- bilities as provided on the SpeedTouch™ syslog web page:

=>:syslog help		are available:
Following commands
config	: Set/Display configuration
ruleadd	: Add a new rule to the syslog configuration.
ruledelete	: Delete a rule in the syslog configuration
flush	: Flushes syslog rules.
list	: List the current syslog configuration
Following command groups are available :

msgbuf
=>:syslog msgbuf help			:
Following commands		are available
show	:	Show messages	in the syslog message buffer.
send	:	Send messages	to remote syslog server.
flush	:	Flush all messages in syslog message buffer.

=>

To display a listing of all generated syslog messages, use following CLI command:

=>:syslog msgbuf show

<173> May 20 17:52:47 xDSL linestate up (downstream: 8000 kbit/s,

upstream: 800 kbit/s; output Power Down: 7.0 dBm, Up: 8.5 dBm; line

Attenuation Down: 0.0 dB, Up: 0.0 dB; snr Margin Down: 9.0 dB, Up: 6.0 dB)

<38> May 20 17:52:50 PPP PAP Authenticate Request sent <38> May 20 17:52:50 PPP PAP Authenticate Ack received <132> May 20 17:52:50 PPP link up (Internet) [101.101.101.16]

<143> May 20 17:52:50 GRP Default destination is routed via gateway 101.101.101.16

<37> May 20 18:07:53 LOGIN User Administrator logged in on CONSOLE

=>

For more information on the syntax and use of the CLI syslog command group commands, see “SpeedTouch™ CLI Reference Guide”.

166 E-DOC-CTC-20051017-0155 v1.0