Technicolor - Thomson SpeedTouchTM620 manual Store Configurations via FTP

Chapter 4

SpeedTouch™ Configuration Management

4.3.2 Store Configurations via FTP

Introduction

Restore/change procedure

Via the procedure described below you can:

Restore a configuration file you previously backed up via the procedure described in “4.3.1 Back up Configurations via FTP” on page 33.

Apply a new configuration to the SpeedTouch™ by storing a new or changed configuration file.

Store multiple SpeedTouch™ configuration and template files on the file system for immediate use.

A configuration file has no limitations regarding the file name to be valid. However, the SpeedTouch™ file system will truncate the full name (including the extension) to maximum 13 characters. For example, when transferring a file “abcdefghijklmnopqrstuvwxyz.ini” to the SpeedTouch™ file system it will be stored as “abcdefghijklm”.

For your convenience, it is advised always to use the extension .ini for configuration files.

Each file present in the ‘/dl’ subdirectory of the SpeedTouch™ file system must have a unique file name.

You can use a similar procedure as the one described here to upload and execute script files (.sts)

The procedure to restore or load a new SpeedTouch™ configuration consists of two main steps:

Step Action

1Transfer the configuration file to the SpeedTouch™

2Applying a configuration stored on the SpeedTouch™

E-DOC-CTC-20051017-0155 v1.0 35