Technicolor - Thomson SpeedTouchTM620 manual Step Action

Chapter 6

SpeedTouch™ System Services

The SNTP tab To enable the SpeedTouch™ SNTP client, select the SNTP TAB:

As long no NTP servers are configured, time will not be controlled by SNTP.

Proceed as follows to add an NTP server:

Step Action

1Click New.

2Enter the IP address or DNS hostname of an NTP server.

3Specify the NTP version of the server.

4Click Apply. This enables the SNTP client, which contacts the NTP server, in order to synchronize the SpeedTouch™ internal clock with the NTP server. If needed, you can correct the synchronized time by selecting your geographical timezone, optionally by enabling or disabling summertime

From now on, your SpeedTouch™’s internal clock will be synchronized every 5 minutes (default setting) with the NTP server.

If needed you can enter additional redundant NTP servers to ensure that the clock always is synchronized with at least one of the provided NTP servers.

58 E-DOC-CTC-20051017-0155 v1.0