Technicolor - Thomson SpeedTouchTM620 manual Command

Chapter 11

SpeedTouch™ Advanced Diagnostics

The Traceroute The traceroute command has the following syntax:

Command

traceroute addr = <ip-address> [count = <number{1-10}>] [size = <number{1-20000}>] [interval = <number{1000-60000}>] [maxhops = <number{1-255}>] [dstport = <number{1-65535}>] [maxfail = <number{0-255}>] [type = <{icmpudp}>]

[utime = <{disabledenabled}>]

It uses the following parameters:

Parameter	Value	Description
addr	<IP-address>	The destination IP address
count	<number{1-10}>	The number of times to reissue a
		traceroute request with the same time
		to live.
size	<number{1-20000}	The size of the packet payload.
interval	<number{1000-60000}>	The size of the packet payload.
maxhops	<number{1-255}>	The upper limit on the number of
		routers through which a packet can
		pass.
dstport	<number{1-65535}>	The UDP destination port number to
		send to.
maxfail	<number{0-255}>	The max number of consecutive
		timeouts allowed before terminating a
		traceroute request.
type	<{icmpudp}>]	The type of traceroute packet(s).
utime	<{disabledenabled}>	Display time in microseconds.

Example

Below is an example of a traceroute command and its reply:

{Administrator}=>traceroute addr 25.0.0.1 count								4	us
ttl=1	101.101.101.1	5731	us	5446	us	5466	us	5789
ttl=2	25.0.0.1	6089	us	5779	us	5699	us	6023	us

188 E-DOC-CTC-20051017-0155 v1.0