K44 Duo Installation & User manual | 11 |
Choose password
The first thing to do before you can start program- ming is to choose a password.
1� Press and hold the SW1 button on the code lock’s circuit board. Both LEDs are lit.
2� Enter a
3� Make a note of the new password in the chart at the back of the manual.
Change password
1� Press B and enter the current password.
2� Enter A27.
3� Enter the new password. A warning tone is heard.
4� Enter the new password once again.
5� Press B to leave programming mode.
6� Make a note of the new password in the chart at the back of the manual.
Programming commands
Always press B and the password before any com- mands are used.
Leaving the programming mode can be done by pressing B.
ENG
