ENG
20 | K44 Duo Installation & User manual |
Delay on/off
When this function is activated, the following hap- pens: If a code is programmed to open two doors, lock relay 2 is not activated until door 1 has been opened and closed.
If door 2 is opened with the exit button, door 2 has to be opened and closed before door 1 can be opened. Note that door contacts must be connected and that Door control must be activated for this to work.
This is how to activate Delay:
1� Enter A80.
2� Enter 1.
To deactivate Delay, press 0 in step 2 instead.
Erase the memory
This is how to erase all programmed information (including the password):
1� Press B and enter the current password.
2� Press SW1 on K44 Duo’s circuit board.
3� Enter 112186.
4� Enter 112186 once again. The memory is now erased and K44 Duo goes back to the factory settings.
