ENG
10 | K44 Duo Installation & User manual |
Programming
Before you start programming K44 Duo, make a note of the codes to be used, to what timing group they should belong and which relay output they should control. At the back of this manual you will find a chart designed for this purpose. Look at the chart as you program K44 according to the instructions below.
Buzzer and LEDs
During programming you will be guided by the buzzer and the LEDs.
In programming mode before a function is chosen: Green and yellow LED flashes.
During programming: Yellow LED goes out. Green LED is lit.
Correct instruction: Confirmed by a rising signal consisting of two quick beeps.
Faulty instruction: Confirmed by a falling signal consisting of two quick beeps.
Note! During programming mode, if a button is not pressed within 20 seconds, the code lock goes back to normal operation.
