ENG
K44 Duo Installation & User manual
Duress or alert
K44 Duo is equipped with an output that can be activated for one of the following reasons:
•A user enters a duress code
OR
•The door held warning time expires or the door is forced open
Choose which alternative to use. Then connect e.g. a bur- glar alarm or similar to the output.
Zero opening
To make entrance easier, e.g. during office hours, connect an external contact. Then use the contact to activate or deactivate zero opening, i.e. opening the door by pressing the zero button on the keypad. Note that this is only applies to relay output 1.
Unlock the door permanently
If the Toggle function is activated, the code can be used to unlock the door. The door remains open until a valid code is entered once again (see the Toggle on/off section).
Door bell
If needed, a door bell can be connected to K44 Duo. To ring the bell, the visitor presses the button labelled with a bell on the code lock’s keypad.
