Fortinet 5140-R manual Shelf manager command line interface CLI

Shelf manager command line interface (CLI) FortiGate-5140 chassis

Figure 6: The telco alarm connector (DB-15 male)

		15		9
				1
	8
Table 5: Telco alarm connector pin assignment
Pin			Name		Description
1			AMIR+		MinorReset+
2			AMIR-		MinorReset-
3			AMAR+		MajorReset+
4			AMAR-		MajorReset-
5			ACNO		CriticalAlarm - NO
6			ACNC		CriticalAlarm - NC
7			ACCOM		CriticalAlarm - COM
8			AMINO		MinorAlarm -NO
9			AMINC		MinorAlarm - NC
10			AMINCOM		MinorAlarm - COM
11			AMANO		MajorAlarm - NO
12			AMANC		MajorAlarm - NC
13			AMACOM		MajorAlarm - COM
14			APRCO		PwrAlarm - NO
15			APRCOM		PwrAlarm - COM
Shield			Shelf-GND		Shelf Ground

Shelf manager command line interface (CLI)

You can use the shelf manager CLI to communicate with the intelligent management controllers of the chassis, with boards in the chassis, and with the shelf manager itself. The CLI is an IPMI-based set of commands that can be accessed directly or through a higher-level management application or a script. Using the CLI, you can access information about the current state of the chassis including current board population, current sensor values, threshold settings, recent events, and overall chassis health.

Connecting to the shelf manager CLI using a serial port

You can connect to the shelf manager CLI by connecting the console cable supplied with your chassis to a management PC console port and to the appropriate shelf alarm panel serial port. To connect to the primary shelf manager use Serial 1. To connect to the secondary shelf manager use Serial 2.

FortiGate-5140-R Chassis Guide

1201-30000-87705-20090108http://docs.fortinet.com/ • Feedback