Paradyne Hotwire 7984 manual About the Hotwire Standalone Termination Unit, M/HDSL Overview

About the Hotwire 7984

Standalone Termination Unit

1

M/HDSL Overview

Hotwiret Multirate High-bit-rate Digital Subscriber Line (M/HDSL) products maximize customer service areas by varying the DSL line rate. This ensures symmetric DSL connectivity over a wide range of telephone line distances and transmission line qualities.

Hotwire products can transport at full (2.048 Mbps) or fractional payload rates over a 4-wire, full-duplex circuit over varying distances based on the conditions of the 4-wire loop. Examples include support for router, multiplexer and PBX connections on 24 gauge (.5 mm) cable up to 21,000 feet (6.4 km).

Hotwire M/HDSL is equipped with an automatic configuration capability that reduces the M/HDSL installation process to a simple plug and play mode. Simply connecting the units to the line automatically configures the customer for the maximum data rate supported by the local loop. M/HDSL units can also be configured at fixed line speeds to achieve maximum distances.

Hotwire 7984 Termination Unit Features

The Hotwire 7984 M/HDSL Standalone Termination Unit is an endpoint for the chassis-mounted Hotwire 8784 M/HDSL Termination Unit housed in the Hotwire 8600 or 8800 Digital Subscriber Line Access Multiplexer (DSLAM).

Two Hotwire 7984 M/HDSL Standalone Termination Units can also be configured to operate in a central office LTU to customer premises NTU environment.

The 7984 Standalone Termination Unit offers these standard features:

HEmbedded Operations Channel (EOC). Provides remote SNMP Traps, Telnet session capability over the M/HDSL link, and download capabilities.

HAsynchronous Terminal Interface (ATI). Provides a menu-drivenVT100-compatible terminal interface for configuring and managing the termination unit locally or remotely by Telnet session.

7984-A2-GB20-10 February 1999 1-1