Paradyne Hotwire 7984 manual Using the Asynchronous Terminal Interface, User Interface Access

Using the Asynchronous Terminal

Interface

2

User Interface Access

You can communicate with the Hotwire 7984 Standalone Termination Unit with an asynchronous terminal interface (ATI) using one of the following methods:

HDirect connection through the COM port of the standalone unit or through the serial port of the DSLAM MCC.

HTelnet session through the Embedded Operations Channel (EOC).

NOTE:

Only one terminal interface session can be active at a time, and another user's session cannot be forced to end. To automatically log out a user due to inactivity, enable the Inactivity Timeout option (see Table A-5,Telnet Session Options, in Appendix A, Configuration Option Tables).

Security can limit ATI access several ways. To limit user access or set up login

IDs, refer to Chapter 7, Security.

Communication Port Settings

Ensure that the device you connect communicates using these settings:

HData rate set to 9.6 kbps.

HCharacter length set to 8.

HParity set to None.

HStop Bits set to 1.

7984-A2-GB20-10 February 1999 2-1