Paradyne Hotwire 7984 manual A-21, Table A-9. SNMP Traps Options 2 of, NMS n IP Address

Configuration Option Tables

Table A-9. SNMP Traps Options (2 of 3)

NMS n IP Address

Possible Settings: 000.000.000.000 ± 223.255.255.255, Clear

Default Setting: 000.000.000.000

Specifies the Internet Protocol address used to identify each SNMP trap manager.

Address Field ± (000.000.000.000 ± 223.255.255.255) ± Enter an address for each SNMP trap manager. The range for the first byte is 000 to 223, with the exception of 127. The range for the remaining three bytes is 000 to 255.

Clear ± Clears the IP address and sets to all zeros.

NMS n Destination

Possible Settings: DSL, COM

Default Setting: DSL

Provides the network destination path of each trap manager.

DSL ± The DSL port is the network destination path.

COM ± The COM port is the network destination path.

General Traps

Possible Settings: Disable, Warm, AuthFail, Both

Default Setting: Both

Determines which SNMP traps are sent to each trap manager.

Disable ± No general trap messages are sent.

Warm ± Sends trap message for warmStart events.

AuthFail ± Sends trap message for authenticationFailure events.

Both ± Sends both trap messages.

NOTE: Refer to Appendix B, Standards Compliance for SNMP Traps.

Enterprise Specific Traps

Possible Settings: Enable, Disable

Default Setting: Disable

Determines if SNMP traps are generated for enterprise-specific events.

Enable ± SNMP traps are generated for enterpriseSpecific events.

NOTE: Refer to Enterprise Specific Traps in Appendix B, Standards Compliance for SNMP Traps.

Disable ± No enterprise-specific event traps are sent.

7984-A2-GB20-10 February 1999 A-21