Paradyne Hotwire 7984 manual Running Network Tests, Main Menu → Test → Network & DSX Tests

Testing

Running Network Tests

Network tests require the participation of your network service provider. To access the Network Tests screen, follow this menu selection sequence:

Main Menu → Test → Network & DSX Tests

main/test/network_DSX Hotwire

		Model: 7974
	NETWORK & DSX TESTS
Test	Command Status	Results

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Local Loopbacks

Line Loopback:	Start	Inactive	00:00:00
Payload Loopback:	Start	Inactive	00:00:00
Repeater Loopback:	Start	Inactive	00:00:00
DTE Loopback:	Start	Inactive	00:00:00
Remote Loopbacks
Send Line Loopback: Down	Send	Inactive	00:00:00
Pattern Tests
Send and Monitor 511	Stop	Active	hh:mm:ss - Errors 99999+

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit ResetMon

Use the Command column to start or stop a test. When the Status column shows that a test is Inactive, Start is displayed; when a test is Active, Stop is displayed. Position the cursor at the desired Start or Stop command and press Enter.

Selecting Abort All Tests from the Test menu will not disrupt a send and monitor 511 test.

The Results column displays the test duration.

When the Send and Monitor 511 test is active, ResetMon is available to reset the error counter to zero.

5-2 February 1999 7984-A2-GB20-10