Paradyne Hotwire 7984 manual Switching Between Screen Work Areas, Example, Procedure

Using the Asynchronous Terminal Interface

Switching Between Screen Work Areas

Select Ctrl-a to switch between the two screen work areas to perform all screen functions.

"Procedure

To access the screen function area below the dotted line:

1.Press Ctrl-a to switch from the screen area to the screen function key area below the dotted line.

2.Select either the function's designated (underlined) character or press the Tab key until you reach the desired function key.

Example:

To save the current screen, type s or S ( Save).

3.Press Enter.

4.To return to the screen area above the dotted line, press Ctrl-a again

main/config/network			Hotwire
		Model: 7984
	NETWORK INTERFACE OPTIONS
Margin Threshold:		±3db
Excessive Error Rate Threshold: 1E±5
Peer IP Address:		111.255.255.000 Clear
Circuit Identifier:			Clear

±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±±

Ctrl-a to access these functions, ESC for previous menu MainMenu Exit Save

2-8 February 1999 7984-A2-GB20-10