Paradyne Hotwire 7984 manual IN-4

Index

SNMP			test
enable/disable management, A-16			aborting, 5-9
limiting access, 7-4			DTE Loopback, 5-5
NMS IP Address, A-19			LED, 4-13,5-8
NMS Security Options, A-18			Line Loopback, 5-3
support overview,		1-5	menu, 5-2
trap options, 6-2			procedures, 5-1
trap support, 1-5			Remote Send Line Loopback, 5-6
traps, B-1			Repeater Loopback, 5-4
typical configuration, 1-5			Send and Monitor 511, 5-7
start-up, ATI, 2-1			status messages, 4-6
status, test messages, 4-6			switch setting for Telco loopback, 3-10
subnet, IP addresses,		8-1	switch setting for Telco remote loopback, 3-10
switchpacks			Telco-initiated, 5-9
definitions, 3-9			terminating, 5-9
location, 3-8			Test Duration,	A-6
S1 definitions,	3-9		Test Timeout,	A-6
system, LEDs, 4-13			timeout
System Options,	A-6		Com port session inactivity,		A-10
			Telnet session inactivity, A-12
T			test, A-6
Telco-initiated			traps, SNMP, 6-2,B-1
			troubleshooting, 6-5
line loopback,	5-9
			DSL performance statistics,		4-8
loopback, enable,		A-7
			DSX-1 performance statistics, 4-10
payload loopback,		5-10
			error statistics,	4-7
remote line loopback, 5-10
remote loopback, enable, A-7			U
Telnet session
access, 7-1			UNIX, TFTP server on, 3-13
access level,	A-12		user interface, 3-3

enable/disable,	A-12	async terminal,	2-1
inactivity timeout, A-12		how to access,	2-1
login required,	A-12	resetting/restoring access, 7-5

options, A-11
terminal	V
communication parameters, 3-3
connecting, 3-3	virtual function keys, 2-7
terminal port, direct connection,	2-1
	W

warmStart, B-1weight of unit, D-1

IN-4 February 1999 7984-A2-GB20-10