Philips SBT10 user manual Troubleshooting, General, About Bluetooth device

7 Troubleshooting

Warning

•• Never remove the casing of this device.

To keep the warranty valid, never try to repair the system yourself.

If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.

General

No power

•Recharge your speaker. No sound

•• Adjust volume on the connected device.

•• When you listen to audio through Bluetooth, make sure that no audio input cable is connected to the AUX socket.

•• Make sure that your Bluetooth device is within the effective operational range.

No response from the speaker

•• Restart the speaker.

About Bluetooth device

The audio quality is poor after connection with a Bluetooth-enabled device.

•• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.

Cannot connect with the device.

•• The Bluetooth function of the device is not enabled. Refer to the user manual of the device for how to enable the function.

10EN

•• This product is already connected with another Bluetooth-enabled device. Disconnect that device and then try again.

The paired device connects and disconnects constantly.

•• The Bluetooth reception is poor. Move the device closer to this product or remove any obstacle between them.

•• For some devices, Bluetooth connection may be deactivated automatically as a power-saving feature.This does not indicate any malfunction of this product.

SBT10_37_UM_V1.0_EN.indd 10

7/29/2013 4:01:52 PM