Paradyne Hotwire 7984 Table A-4. Communication Port Options 3, Login Required Terminal Use Only

Configuration Option Tables

Table A-4. Communication Port Options (3 of 3)

Login Required (Terminal Use Only)

Possible Settings: Enable, Disable

Default Setting: Disable

Specifies if an ID and password are required to access the asynchronous terminal interface on the communication port. Login IDs are created with a password and access level. Refer to Creating a Login in Chapter 7, Security.

Enable ± Login ID and password are required to access the asynchronous terminal interface.

Disable ± No Login ID and password are required to access the asynchronous terminal interface.

Port Access Level (Terminal Use Only)

Possible Settings: Administrator, Operator

Default Setting: Administrator

Specifies the highest level of access allowed when accessing an ATI session through a Telnet session.

Administrator ± This is the higher access level, permitting full control of the 7984 Termination Unit. Access level is determined by the Login ID. If Telnet Login Required is disabled, the session access level is Administrator.

Operator ± This is the lower access level, permitting read-only access to status and configuration screens.

Inactivity Timeout (Terminal Use Only)

Possible Settings: Enable, Disable

Default Setting: Disable

Provides automatic logoff of a Telnet session.

Enable ± The terminal session terminates automatically after the Disconnect Time.

Disable ± A terminal session will not be closed due to inactivity.

Disconnect Time (Minutes) (Terminal Use Only)

Possible Settings: 1 ± 60

Default Setting: 5

Number of minutes of inactivity before the session terminates automatically. Timeout is based on no keyboard activity.

HDisconnect Time (minutes) appears when Inactivity Timeout is enabled.

1 to 60 ± The Telnet session is closed after the selected number of minutes.

A-10 February 1999 7984-A2-GB20-10