Paradyne Hotwire 7984 manual Completed successfully

Initial Startup and Configuration

2.Position the cursor in the TFTP Server IP Address field. Enter the TFTP server IP address.

3.Position the cursor in the Destination field. Use the spacebar to select a network destination for the TFTP server. Select DSL if the TFTP server destination is the DSL link or COM if the TFTP destination is the COM port.

4.Position the cursor in the TFTP Transfer Direction field. Use the spacebar to select Download from Server or Upload to Server.

5.Position the cursor at the Start Transfer field. Use the spacebar to select Yes. Press Enter.

When the data transfer is complete, the Transfer Status field changes to

Completed successfully.

6.Position the cursor at the Activate New Configuration field and select Yes to activate a new downloaded configuration. Press Enter.

NOTE:

The configuration options DSL Mode and Telnet Session are not changed when a new configuration is loaded. You must change these settings with the appropriate configuration menus after the new configuration is activated. See Table A-3,System Options, and Table A-5,Telnet Session Options, in Appendix A, Configuration Option Tables.

3-14 February 1999 7984-A2-GB20-10