SMS related CMS Error Codes GSM | Siemens TC63 guide

TC63 AT Command Set

2.12 AT+CMEE

s

Table 2.8: SMS related "CMS ERROR" Codes (GSM 07.05)

	<err> Code	Text (if AT+CMEE=2)
1		Unassigned (unallocated) number
8		Operator determined barring
10		Call barred
21		Short message transfer rejected
27		Destination out of service
28		Unidentified subscriber
29		Facility rejected
30		Unknown subscriber
38		Network out of order
41		Temporary failure
42		Congestion
47		Resources unavailable, unspecified
50		Requested facility not subscribed
69		Requested facility not implemented
81		Invalid short message transfer reference value
95		Invalid message, unspecified
96		Invalid mandatory information
97		Message type non-existent or not implemented
98		Message not compatible with short message protocol state
99		Information element non-existent or not implemented
111		Protocol error, unspecified
127		Interworking, unspecified
128		Telematic interworking not supported
129		Short message Type 0 not supported
130		Cannot replace short message
143		Unspecified TP-PID error
144		Data coding scheme (alphabet) not supported
145		Message class not supported
159		Unspecified TP-DCS error
160		Command cannot be actioned
161		Command unsupported
175		Unspecified TP-Command error
176		TPDU not supported
192		SC busy
193		No SC subscription
194		SC system failure
195		Invalid SME address
196		Destination SME barred
197		SM Rejected-Duplicate SM
198		TP-VPF not supported
199		TP-VP not supported

TC63_ATC_V00.490		Page 49 of 501	5/24/05

Confidential / Draft - Do not copy

Image 49

Siemens TC63 manual SMS related CMS Error Codes GSM

Contents

AT Command Set TC63 AT Command Set Contents Atscfg AT+CSCSATSM20 AT+CMER Atspwd AT+CPWDAtscsl AT+CGMI Atslcd AtscniAtstcd ATP Atsics AT+CUSDAtsiss Atsiso AT+FRM AT+FRHAT+FRS AT+FTH Atsmgr AtsmgoAtssda AT+CRSM AT+CLVL ATMAT+VTD AT+VTS 21.2 List of Tables SIM usage states of SAP server List of Figures Scope of the document Introduction Related documents Quick reference table Document conventions Superscript notation for parameters and values Using Parameters AT Command Syntax Combining AT commands on the same command line Supported character sets BSP AsciiNull GSM alphabet tables and UCS2 character values TC63 AT Command Set GSM 2 UCS2 and GSM data coding and conversion for SMS text modeUCS2 Case GSM IRA to 8 bit IRA to 16 bit Software Flow Control XON/OFF Handshake Serial Interface Flow ControlHardware Flow Control RTS/CTS Handshake Communication between Customer Application and TC63 Unsolicited Result Code Presentation CSP Common PCN Handset Specification Cphs Errors and Messages AT&Fvalue Configuration CommandsValuenum AT&Vvalue AT&V Display current configurationActive Profile Active Profile 1 AT&V responses+FCLASS +CGSMS TC63 AT Command Set AT&Wvalue ERROR/+CME Error err ATQn ATQ Set result code presentation mode Error ATV Set result code format modeVerbose and numeric result codes ATVvalue ATXvalue ATX Set Connect result code format and call monitoring AT\Vvalue AT\V Set Connect result code format ATZvalue ATZ Set all current parameters to user defined profile AT+CFUN Set phone functionality OK Error +CME ErrorAT+CFUN=? +CFUN fun Sysstart Sysstart Charge only ModeFunnum Rstnum Wake up the ME from Sleep modeFun=0 AT+CFUN=1 ATSMSO=? Atsmso Switch off mobile stationAtsmso Smso MS OFF OK AT+GCAP=? 11 AT+GCAP Request complete TA capabilities listAT+GCAP +GCAP name OK Error 12 AT+CMEE Mobile Equipment Error Message FormatAT+CMEE=? AT+CMEE? 12.1 CME/CMS Error Code Overview Err Code Text if AT+CMEE=2 772 SIM powered down SMS related CMS Error Codes GSM No +CNMA ACK Expected AT+CSCS=? 13 AT+CSCS Select TE character setAT+CSCS? ATSCFG=? Atscfg Extended Configuration SettingsAutoExecATC, time range of AutoExecPeriod ATSCFG? Automatic AT command execution Radio band selection ATSCFG=Radio/Band, rbp, rba Sysstart Airplane Mode AutoExecATC EcATC at a given AutoExecIndexRiod AutoExecType value AutoExecType event AutoExecATCstr+CSCS RFUAutoExecPeriodstr+CSCS AutoExecPeriodTimeLeftstr+CSCS Sysstart Airplane Mode appears Now to register to the GSM network GSM 850 MHz Roprstr+CSCS AT+CMGF=1 GroidAT+CNMI=1,1 AT+CMGD=1 AT+CSCS=GSM Smso MS OFF ATSCFG=URC/Ringline,asc0 SCFGURC/Ringline,asc0 SCFGURC/Ringline,localATSCFG=URC/Ringline SCFGURC/Ringline,off SM20CallMode, CmgwMode ATSM20 Set M20 compatibility modeATSM20=CallMode, CmgwMode AT+CMER Mobile Equipment Event Reporting Status Control CommandsAT+CMER=? AT+CMER? Keypnum ModenumDispnum Indnum AT+CIND=? AT+CIND Indicator controlAT+CIND? Also refer to .1, Call Status Information No Carrier ATSIND=? Atsind Extended Indicator ControlATSIND? +CIEV indDescr, adnEntry, adnNumber, adnType, adnText +CIEV indDescr, indValue+CIEV indDescr, indValue, vmCounter +CIEV indDescr, indValue, eonsOperator, servProvider TC63 AT Command Set TC63 AT Command Set AdnEntrynum Atsind only AT+CIND ATH ATD030123456 AT+CEER=? AT+CEER Extended Error ReportAT+CEER +CEER locationID, reason, ssRelease OK AT+CHLD=2 OK AT+CHLD=3 Cause Location ID for the extended error report GSM release cause for Mobility Management MM GSM release cause for L3 Radio Resource RR GSM release cause for L3 Call Control CC TC63 AT Command Set GSM Release cause for Supplementary Service Call Siemens release cause for Gprs API GSM cause for L3 Protocol module or other local causeSiemens release cause for PPP/IP-Stack +CAUSE locationIDreason ATS18 Extended call release reportATS18? ATS18=n Connect 9600/RLP Busy AT+CPAS=? AT+CPAS Mobile equipment activity statusAT+CPAS +CPAS pas AT+WS46=? AT+WS46 Select wireless networkAT+WS46? AT+WS46=n AT\Q Flow control Serial Interface Control CommandsAT\Qn AT&Cvalue AT&C Set circuit Data Carrier Detect DCD function mode AT&Dvalue AT&D Set circuit Data Terminal Ready DTR function mode AT&Svalue AT&S Set circuit Data Set Ready DSR function mode ATEvalue ATE Enable command echo AT+ICF=? AT+ICF Serial Interface Character FramingAT+ICF? +ICF format, parity TC63 AT Command Set AT+IFC? AT+IFC=?+IFC TEflowcontrol, TAflowcontrol AT+IFC=TEflowcontrol, TAflowcontrol TC63 AT Command Set AT+ILRR=? AT+ILRR Set TE-TA local rate reportingAT+ILRR? TC63 AT Command Set AT+IPR=? AT+IPR Set fixed local rateAT+IPR? +IPR rate Autobauding AT&W AT+CMUX=? 10 AT+CMUX Enter multiplex modeAT+CMUX? Restrictions on Multiplex mode AT&V Second serial interface ASC1 ATSTPB=? +CME Error unknownATSTPB? Stpb n AT+CPIN PIN Authentication Security CommandsAT+CPIN=? AT+CPIN? Codetext What to do if PIN or password authentication fails? TC63 AT Command Set AT+CPIN2=? AT+CPIN2 PIN2 AuthenticationAT+CPIN2? AT+CPIN2=pin, new pin AT+CPIN2? +CPIN2 SIM PUK2 +CME ErrorAT+CPBS=FD ATSPIC=? Atspic Display PIN counterATSPIC? Atspic Facilitystr At+cpin=9999 +CME Error incorrect passwordAt+cpin? +CPIN SIM PIN +CPIN PH-SIM PIN +CPIN SIM PUKSpic PH-SIM PIN Spic PH-SIM PUK +CPIN Ready OK +CREGSpic SIM PIN2 AT+CLCK Facility lock AT+CLCK=facility, mode, password, classAT+CLCK=? +CLCK status, class Factory defined SIM locks Statusnum PasswordstrClassnum SMS AT+CLCK=SC,1,9999 Mode=2AT+CLCK=SC,0,9999 SIM PIN1 AT+CPIN=1111 AT+CPIN? +CPIN SIM PINAT+CPIN? +CPIN PH-SIM PIN AT+CPIN=3333 Atslck Facility lock ATSLCK=facility, mode, password, classATSLCK=? Slck status, class +CPWDlist of supported facility, password length AT+CPWD Change PasswordAT+CPWD=facility, old password, new password Password length 4 to 8 digits Word authentication fails? Password length 4 digits AT+CPIN2 command AT+CPWD=PS,12345678 AT+CPWD=PS,12345678,1111 SPWDlist of supported facility, password length Atspwd Change PasswordATSPWD=facility, old password, new password ATSPWD=? ATSPWD=CM Password length of CM 8 digitsPass Atscsl Customer SIM Lock Error CME ErrorATSCSL=? Scsl Datastr PUKstr +CPIN PH-NET PUK AT+CPBS? AT+CPIN=11223344 ATI Display product identification information Identification CommandsATI ATIvalue AT+GMI Request manufacturer identification AT+CGMI Request manufacturer identification AT+GMM Request model identification AT+CGMM Request model identification AT+GMR Request revision identification of software status AT+CGMR Request revision identification of software status AT+CGSN=? AT+GSN Request International Mobile Equipment Identity ImeiAT+CGSN AT+GSN=? AT+CIMI AT+CIMI=?Imsi Imsistr Call Status Information Call related CommandsAT+CIND and AT+CMER ATA ATA Answer a callConnect text Textstr ATDnmgsm ATD Mobile originated call to specified numberNo Dialtone ATD03022222222 Mgsmstr Memstr ATDmemnmgsm ATDSM15 AT+CPBR=1,xxATDLD9 Number ATDstrmgsm Responding field ATDIn Atdi Mobile originated call to Isdn number Atdl Atdl Redial last number used ATHn ATH Disconnect existing connection AT+CHUP=? 10 AT+CHUP Hang up callAT+CHUP ATSHUP=cause, cn ATSHUP=?Causenum TC63 AT Command Set ATS0=n ATS0? ATS6? 13 ATS6 Set pause before blind dialingATS6=n ATS7=n ATS7? ATS8=n ATS8? ATS10? CarrierATS10=n ATOn ATO Switch from command mode to data mode / PPP online mode 18 +++ Switch from data mode to command mode AT+CBST=? 19 AT+CBST Select bearer service typeAT+CBST? +CBST speed, name, ce Cenum&W AT+CRLP=? Non-transparent data callsAT+CRLP? +CRLP iws, mws, T1, N2 AT+CLCC=? 21 AT+CLCC List current calls of MEAT+CLCC +CLCC idx, dir, stat, mode, mpty, number, type, alpha Numberstr MptynumTypenum ATSLCC=? Atslcc Siemens defined command to list current calls of MEATSLCC? Atslcc Presentation of URC Slcc disabled Traffic channel assignednum Statnum At+cpin=9999 +CREG Alphastr+CREG 1,0145,0016 Atsm20=0 Ring Slcc Slcc 1,1,0,0,0,1,1234567,129 AtaAth +CR mode 23 AT+CR Service reporting controlAT+CR=? AT+CR? AT+CRC? AT+CRC=? 25 AT+CSNS Single Numbering Scheme +CSNS modeAT+CSNS=? AT+CSNS? ATSCNI=? Atscni List Call Number InformationAtscni Scni id1,cs,number,type Scni id2,cs,number,type ATSLCD=? Atslcd Display Last Call DurationAtslcd Timestr ATSTCD=? Atstcd Display Total Call DurationAtstcd ATT Select tone dialing ATP Select pulse dialingATP ATT AT+COPN Read operator names Network Service CommandsAT+COPN=? AT+COPN AT+COPS=? AT+COPS Operator SelectionAT+COPS? +COPSmode, format, oper OpStatusnum AT+COPS=mode, format, operOperstr ATSOPS=? Atsops Extended Operator SelectionEonsTypenum Formatnum OpName AT+CREG=? AT+CREG Network registrationAT+CREG? +CREG n, stat, lac, ci Lacstr AT+COPS=0 AT+CREG=2+CREG 1,0145,291A AT+CSQ=? AT+CSQ Signal qualityAT+CSQ +CSQ rssi,ber ATSMONC=? Atsmonc Cell MonitoringAtsmonc Channnum BSICnum ATSMOND=? Atsmond Cell MonitoringAtsmond Smond sci, nci, TA, rssiber RxQualnum RxLevnumTimeslotnum SMOND262,01,3008,6060,32,100,66,,,0,,,0 Atsmond ATMONI=? Atmoni Monitor idle mode and dedicated modeAtmoni ATMONI=period MCC MNC Atmoni responses Service states ATMONP=? Atmonp Monitor neighbour cellsAtmonp ATMONP=period Chann DBm Atmonp responsesMCC MNC BCC 100 ATSMONG=? Atsmong Gprs MonitorAtsmong ATSMONG=table, period Gprs Monitor Atsmong Cell Info TableBcch Pbcch PAT MCC MNC NOM RAC # Cell # ATSALS=? Atsals Alternate Line ServiceATSALS? Sals view, line Sals ATSALS=1,1 ATSHOM=? Atshom Display HomezoneAtshom Shom homezonestate Atsplm Read the Plmn list Error +CME ErrorATSPLM=? Atsplm AT+CPOL=? 14 AT+CPOL Preferred Operator ListAT+CPOL? +CPOL index, format, operator ATSPLR=? Atsplr Read entry from the preferred operators listATSPLR=index1, index2 Splr index1oper Splr index2oper ATSPLW=? Atsplw Write an entry to the preferred operators listATSPLW=index, oper AT+CACM Accumulated call meter ACM reset or query Supplementary Service CommandsAT+CACM=? AT+CACM? ATSACM=? Atsacm Advice of charge and query of ACM and ACMmaxAtsacm Sacm n, acm, acmMax Ccmstr AT+CAMM=? AT+CAMM Accumulated call meter maximum ACMmax set or queryAT+CAMM? +CAMM acmmax AT+CAOC=? AT+CAOC Advice of Charge informationAT+CAOC? AT+CAOC AT+CCUG=? AT+CCUG Closed User Group+CCUGn, index, info AT+CCUG=n, index, info Infonum AT+CCFC=? AT+CCFC Call forwarding number and conditions controlAT+CCFC=reason, mode, number, type, class, time Call Forwarding active Timenum At+ccfc=0,0 At+ccfc=0,3,+493012345678,145At+ccfc=0,4 To query the status of CFU for all classes At+ccfc=4,2 +CME error operation not supported at+ccfc=5,2 AT+CCWA=? AT+CCWA Call WaitingAT+CCWA? Scwa Calling numberstr CLI validitynum Type of numbernum At+ccwa=,1 At+ccwa=1At+ccwa=,2 At+ccwa=1,1 AT+CHLD=? AT+CHLD Call Hold and MultipartyAT+CHLD=n Udub +CCWA +491791292364,145,32,,0 At+ccwa=1,1,1At+chld=2 Hello AT+CLIP=? AT+CLIP Calling line identification presentationAT+CLIP? +CLIP number, type, , , alpha, CLI validity Suppress unsolicited result codes AT+CLIR=? 10 AT+CLIR Calling line identification restrictionAT+CLIR? +CLIRn, m AT+COLP=? 11 AT+COLP Connected Line Identification PresentationAT+COLP? +COLP number, type Typenum AT+CPUC=? 12 AT+CPUC Price per unit and currency tableAT+CPUC? +CPUC currency, ppu AT+CPUC=EUR,0.10,8888 +CME Error SIM PIN2 requiredAT+CPUC=EUR,0.10 AT+CSSN=? 13 AT+CSSN Supplementary service notificationsAT+CSSN? +CSSI code Code 2num Code 1num AT+CUSD=? 14 AT+CUSD Supplementary service notificationsAT+CUSD? AT+CUSD=n, str, dcs Dcsnum Strstr Access is provided to the following Internet Services Internet Service Commands Address notation ATSICS=? Atsics Internet Connection Setup ProfileATSICS? Type ParmTagAlphabet ARate ConParmValue-conTypestr ConParmValuestrConParmValue-alphabetstr ConParmValue-dataRatestr Example Gprs connection profile Example Default values of a CSD connection profileProfileId1 ATSICS=0,apn,internet.t-d1.de Atsiss Internet Service Setup Profile ATSISS? ATSISS=?Siss srvProfileId, srvParmTag, srvParmValue ATSISS=srvProfileId, srvParmTag, srvParmValue SrvParmTag SrvProfileIdnum TC63 AT Command Set Mand can be executed. After the last packet the URC Sisw x Content-Type multipart/mixed SrvParmValuestr PDelFlagSrvParmValue-srvTypestr SrvParmValue-pCmdnum SrvParmValue-alphabetstr With Atsiso Example Configuring Socket Listener Example Configuring and Using FTP Upload Example Configuring and Using FTP Download Example Sending Email over Gprs Passwd User, subscriber1SmFrom, subscriber1@testdomain.com SmRcpt, subscriber2@testdomain.com ATSISO=? Atsiso Internet Service OpenATSISO? ATSISO=srvProfileId SocketStatenum SrvStatenumRxCountnum TxCountnum UrcInfoIdnum UrcCausenumUrcInfoTextstr SocketState=4 Atsisc=0 ATSISC=? Atsisc Internet Service CloseATSISC=srvProfileId, closeMode CloseModenum ATSISC=srvProfileId,close Effect of parameter closeMode URC Sisr srvProfileId, urcCauseId will be issued if Atsisr Internet Service Read DataATSISR=? ATSISR=srvProfileId, reqReadLength UrcCauseIdnum URC Sisw srvProfileId, urcCauseId will be issued if Atsisw Internet Service Write DataATSISW=? ATSISW=srvProfileId, reqWriteLength TC63 AT Command Set URC Information Elements Related to the Service Application Information Elements Related to Internet Service URCsUrcInfoId UrcInfoText URC Information Elements Related to Http Service URC Information Elements Related to FTP Service URC Information Elements Related to Smtp Service URC Information Elements Related to POP3 Service 11.1 AT+CGACT PDP context activate or deactivate Gprs CommandsAT+CGACT=? AT+CGACT? Cidnum 11.1 AT+CGACT AT+CGANS=? Connect No Carrier Error +CME ErrorAT+CGANS=response, L2P, cid Responsenum TC63 AT Command Set AT+CGATT=? 11.3 AT+CGATT Gprs attach or detachAT+CGATT? State=1 AT+CGAUTO=? AT+CGANS commandAT+CGAUTO? +CGAUTO n TC63 AT Command Set AT+CGDATA=? 11.5 AT+CGDATA Enter data stateAT+CGDATA=L2P, cid, cid Automatic deactivation of PDP context during dial-up PPP AT+CGDCONT=? 11.6 AT+CGDCONT Define PDP ContextAT+CGDCONT? +CGDCONT cid, PDPtype, APN, PDPaddr, dcomp, hcomp PDPaddrstr APNstrDcompnum Hcompnum AT+CGEQMIN? AT+CGEQMIN=? Guaranteed bitrate DLnum Guaranteed bitrate ULnumTraffic classnum Maximum bitrate ULnum Residual bit error ratiostr SDU error ratiostrDelivery ordernum Maximum SDU sizenum Traffic handling prioritynum Transfer delaynum AT+CGEQREQ=? 11.8 AT+CGEQREQ 3G Quality of Service Profile RequestedAT+CGEQREQ? Traffic classnum Maximum SDU sizenum Transfer delaynum AT+CGPADDR=? 11.9 AT+CGPADDR Show PDP addressAT+CGPADDR=cid,cid +CGPADDR cid, PDPaddress AT+CGQMIN=cid, precedence, delay, reliability, peak, mean +CGQMIN cid, precedence, delay, reliability, peak, meanAT+CGQMIN=? AT+CGQMIN? Precedencenum Delaynum Delay classReliabilitynum Peaknum Meannum AT+CGDCONT=1,IP OK AT+CGQMIN= +CGQREQ cid, precedence, delay, reliability, peak, mean 11.11 AT+CGQREQ Quality of Service Profile RequestedAT+CGQREQ=cid, precedence, delay, reliability, peak, mean AT+CGQREQ=? Delaynum AT+CGDCONT=1,IP AT+CGQREQ= +CGQREQ1,0,0,0,0,0 AT+CGREG=? 11.12 AT+CGREG Gprs network registration statusAT+CGREG? +CGREG n, stat, lac, ci Stat=1 or stat=5 Plmn +CGSMS service 11.13 AT+CGSMS Select service for MO SMS messagesAT+CGSMS=? AT+CGSMS? ATSGACT=? Atsgact Query all PDP context activationsATSGACT? Sgact ifc, cid, state Sumnum ATSGAUTH=? Atsgauth Set type of authentication for PPP connectionATSGAUTH? ATSGCONF=? Atsgconf Configuration of Gprs related ParametersATSGCONF? Sgconf llcpdulengthU, llcpdulengthI, Gprs msclass Connect No Carrier ATD*99* calledaddress* L2P* cid# 11.18 ATD*99# Request Gprs serviceCalledaddressstr PPP ATD*98* cid# 11.19 ATD*98# Request Gprs IP service 11.20 ATH 11.21 ATS0 AT+CGDCONT=1,IP Using Gprs AT commands ExamplesAT+CGDCONT=2,IP, internet.t-d1.gprs AT+CGDCONT=1 AT+CGQREQ=1 AT+CGQREQ=1,2AT+CGACT=1,2 AT+CGACT= By AT+CGDCONT Using the Gprs dial command ATD FAX parameters FAX CommandsAT+FCLASS Parameter EIA/TIA-578-A AT+FCLASS=? 12.2 AT+FCLASS Fax Select, read or test service classAT+FCLASS? AT+FCLASS=n If error related to ME functionality 12.3 AT+FRH Receive Data Using Hdlc FramingAT+FRH=mod TIA/EIA-578 AT+FRM=? 12.4 AT+FRM Receive DataAT+FRM=mod AT+FRS=time 12.5 AT+FRS Receive Silence AT+FTH=mod 12.6 AT+FTH Transmit Data Using Hdlc Framing AT+FTM=? 12.7 AT+FTM Transmit DataAT+FTM=mod AT+FTS=time 12.8 AT+FTS Stop Transmission and Wait SMS parameters Short Message Service SMS CommandsAckpdunum Cdatanum Lengthnum IeianumMaxnum Mem1str Midnum Mem3strPagenum Pagesnum Sctsnum RefnumSeqnum Statstr Tooanum TodanumToranum Toscanum Error +CMS Error 13.2 AT+CMGC Send an SMS commandAT+CMGC=? +CMGC mr, scts 13.3 AT+CMGD Delete SMS message OK Error +CMS ErrorAT+CMGD=? AT+CMGD=index 13.4 AT+CMGF Select SMS message format +CMGF modeAT+CMGF=? AT+CMGF? AT+CMGL=? 13.5 AT+CMGL List SMS messages from preferred storeAT+CMGL TC63 AT Command Set AT+CMGR=? 13.6 AT+CMGR Read SMS messages+CMGR stat, fo, mr, ra, tora, scts, dt, st Data +CMGR stat, fo, ct, pid, mn, da, toda, length Data TC63 AT Command Set AT+CMGS=? 13.7 AT+CMGS Send SMS message+CMGS mr, scts +CMGS mr, ackpdu TC63 AT Command Set AT+CMGW=? 13.8 AT+CMGW Write SMS messages to memoryAT+CMGW +CMGW index TC63 AT Command Set AT+CMSS=? 13.9 AT+CMSS Send SMS messages from storageAT+CMSS=index, da, toda +CMSS mr, scts AT+CNMA AT+CNMA=?AT+CNMA=n AT+CNMI=? 13.11 AT+CNMI New SMS message indicationsAT+CNMI? +CDS lengthCRLFpdu +CBM sn, mid, dcs, page, pagesCRLFdata+CDS fo, mr, ra, tora, scts, dt, st Ds=2 +CDSI mem3, index Unsolicited result code 13.12 AT+CPMS Preferred SMS message storage OK Error Error +CMS ErrorAT+CPMS=? AT+CPMS? Total3num AT+CSCA=? 13.13 AT+CSCA SMS service centre addressAT+CSCA? +CSCA sca, tosca AT+CSCB=? 13.14 AT+CSCB Select Cell Broadcast Message IndicationAT+CSCB? +CSCB mode, mids, dcss AT+CSDH=? 13.15 AT+CSDH Show SMS text mode parametersAT+CSDH? Not show pid , mn , da , toda , length or cdata AT+CSMP=? 13.16 AT+CSMP Set SMS text mode parametersAT+CSMP? +CSMPfo, vp/ scts, pid, dcs Pidnum AT+CSMS=? 13.17 AT+CSMS Select Message ServiceAT+CSMS? Bmnum ATSCML=? Atscml List Concatenated SMS messages from preferred storeAtscml Command Description ATSCMR=? Atscmr Read concatenated SMS messagesScmr stat, fo, mr, ra, tora, scts, dt, st Data Scmr stat, fo, ct, pid, mn, da, toda, length Data AT+CMGR ATSCMS=? Atscms Send concatenated SMS messages ATSCMW=? Atscmw Write concatenated SMS messages to memoryScmw index ATSLMS=? Atslms List SMS Memory StorageAtslms Atsmgl ATSMGL=?ATSMGL=stat OK Error CME Error Smgo n, modeATSMGO=? ATSMGO? AT+CPMS ATSMGR=? Atsmgr Read SMS message without setting status to REC ReadSmgr ATSMGR=index ATSSCONF=? Atssconf SMS Command ConfigurationATSSCONF? ATSSCONF=ra ATSSDA=? Atssda Set SMS Display AvailabilityATSSDA? SSDAda ATSSMSS=? Atssmss Set Short Message Storage SequenceATSSMSS? Ssmss seq 14.1 AT+CRSM Restricted SIM Access SIM related CommandsAT+CRSM=? Commandnum AT+CRSM=command, fileID, P1, P2, P3, data+CRSM sw1,sw2,response FileIDnum Responsestr Sw2num ATSXSM=command, fileID, P1, P2, P3, data Atsxsm Extended SIM AccessATSXSM=? Sxsm sw1, sw2,response Sxsm 3445566778899AABBCCDDEEFF ATSCKS=? Atscks Query SIM and Chip Card Holder StatusATSCKS? Scks mode, SimStatus ATSCKS=1 SimStatusnum&VScks ATSSET=? Atsset Indicate SIM data readyATSSET? Ssim Ready ATSCID=? Atscid Display SIM card identification numberAtscid Scid cid AT+CXXCID=? 14.6 AT+CXXCID Display card IDAT+CXXCID +CXXCID cid Remote SIM Access RSA Commands TC63ATCV00.490 374 24/05 Confidential / Draft Do not copy TC63ATCV00.490 375 24/05 Confidential / Draft Do not copy ATSRSA=? Atsrsa Remote SIM Access ActivationATSRSA? SapRolenum DevIdnumMuxChannum BeaconPernum DataFormnumDiscTypenum An URC Srsa devId , sapRole , connState with ConnStatenum ATSRSM=? Atsrsm Remote SIM Access MessageATSRSM=RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc Srsm RsaDevId, RsaMsgId, RsaMsgData, RsaMsgLen, RsaMsgRc ConnStatusnum MaxMsgSizenumCmdApdustr CmdApduLennum SAP Request Message Parameter SAP Response Message Parameter Establishing an RSA connection in a PC environment Related AT CommandsCar cradle scenario Xsap Bluetooth scenario SAP Atssta SAT Interface Activation SIM Application Toolkit SAT CommandsATSSTA=? ATSSTA? AllowedInstancenum AlphabetnumSatProfilestr Sstn cmdType Sstn SAT NotificationSstn cmdTerminateValue ATSSTGI=? Atsstgi SAT Get InformationATSSTGI? Sstgi state, cmdType ATSSTR=? Atsstr SAT ResponseATSSTR? Sstr state, cmdType Sort Order for Phonebooks Phonebook Commands AT+CNUM=? 17.2 AT+CNUM Read own numbersAT+CNUM +CNUM alpha, number, type AT+CPBR=? 17.3 AT+CPBR Read from Phonebook+CPBR 1-maxloc,nlength, tlength AT+CPBR=location1, location2 Nlengthnum MaxlocnumTlengthnum +CPBR1-100,20,17 AT+CPBS=? 17.4 AT+CPBS Select phonebook memory storage+CPBS storage, used, total AT+CPBS=storage Totalnum Usednum AT+CPBW=? 17.5 AT+CPBW Write into Phonebook+CPBW 1-maxloc,nlength, list of supported types, tlength AT+CPBW=location, number, type, text Typenum AT+CPBW=1 AT+CPBW=,+431234567,145,international ATSDLD=? Atsdld Delete the last number redial memoryAtsdld ATSPBC=? Atspbc Find first matching entry in sorted phonebookATSPBC=schar Spbc index ATSPBD=? Atspbd Purge phonebook memory storageATSPBD=storage ATSPBG=? Atspbg Display phonebook entries in alphabetical orderSpbg 1-used,nlength, tlength ATSPBG=index1, index2, RealLocReq RealLocReqnum Using Atspbg with RealLocReq Using Atspbg without RealLocReqAT+CPBR=27 ATSPBS=? Atspbs Step through the selected phonebook alphabeticallyATSPBS=value, RealLocReq Index-anum Index-bnum Counter valueIndex-b=index-a+1 Index-cnum At&f Internal-counternumAtspbs=2 SPBS33,+49301234567,145,TomTailor SPBS1,+999999,145,Arthur SPBS2,+777777,145,Bill At+cpbr=27 Audio programming model Audio Commands ATL Set monitor speaker loudness ATM Set monitor speaker modeATLval Valnum AT+CLVL=? 18.4 AT+CLVL Loudspeaker volume levelAT+CLVL? AT+CFUN=1,1 AT+CMUT=? 18.5 AT+CMUT Mute controlAT+CMUT? AT+VTD=? 18.6 AT+VTD Tone durationAT+VTD? Duration AT+VTS=? 18.7 AT+VTS Dtmf and tone generationAT+VTS=dtmfString AT+VTS=dtmf, duration ATSAIC=? Atsaic Audio Interface ConfigurationATSAIC? Saic io, mic, ep TC63 AT Command Set ATSNFA=? Atsnfa Set or query of microphone attenuationATSNFA? OK atsnfa? Snfa OK atsnfa? Snfa OK atsnfs=4 OK atsnfa=1 OK atsnfi? Snfi 5,1 ATSNFD=? Atsnfd Set audio parameters to manufacturer default valuesAtsnfd ATSNFI=? Atsnfi Set microphone path parametersATSNFI? Snfi inBbcGain, inCalibrate Snfm MicSwitch, MicVccState Atsnfm Set microphone audio path and power supplyATSNFM=MicSwitch, MicVccCtl ATSNFM=? MicVccStatenum ATSNFO=? Atsnfo Set audio output = loudspeaker path parameterATSNFO? TC63 AT Command Set ATSNFPT=? Atsnfpt Set progress tonesATSNFPT? Snfpt pt ATSNFS=? Atsnfs Select audio hardware setATSNFS? ATSNFS=2 ATSAIC? ATSNFS=4 ATSAIC?Atsnfw ATSNFS=4 TC63ATCV00.490 430 24/05 Confidential / Draft Do not copy ATSNFTTY=? Atsnftty Signal TTY/CTM audio mode capabilityATSNFTTY? Snftty audioState ATSNFV=? Atsnfv Set loudspeaker volumeATSNFV? Snfv outStep ATSNFW=? Atsnfw Write audio setting in non-volatile store ATSRTC=? Atsrtc Ring tone configurationATSRTC? Atsrtc Volumenum Error OK Hardware related Commands19.1 AT+CCLK Real Time Clock AT+CCLK=? AT+CALA=? 19.2 AT+CALA Set alarm timeAT+CALA? +CALA time, n, type, text +CALA text Sysstart Airplane Mode +CALA text Atsmso Smso MS OFF OK Shutdown Sysstart Airplane Mode +CALA Good MorningAT+CALA= OK AT+CALA? ATSBC=? Atsbc Battery Charge ControlATSBC? SBC bcs, bcl, mpc SBC Overvoltage shutdown SBC Overvoltage warningBcsnum Bclnum Responses returned by read command ATSBV=? Atsbv Battery/Supply VoltageAtsbv SBV value ATSCTM? ATSCTM=? Sctmb Sctma Sctmb Sctma ATSSYNC=? Atssync Configure Sync PinATSSYNC? SSYNCmode ME status indicated by status LED patterns TC63 AT Command Set Atsspi Serial Protocol Interface ATSSPI=basicConfiguration, delayOne, delayTwoATSSPI=? ATSSPI? DelayOnenum Specifying Delay Time for I²CDelayTwonum TC63ATCV00.490 452 24/05 Confidential / Draft Do not copy Channel Open / Close Transmitting Data over AT Interface Message syntax Structure of Messages on the I²C Bus Protocol error Error Handling on the I²C Bus Example Using I²C Bus 20.1 A/ Repeat previous command line Miscellaneous Commands ATS3? 20.2 ATS3 Set command line termination characterATS3=n ATS4? 20.3 ATS4 Set response formatting characterATS4=n ATS5? 20.4 ATS5 Write command line editing characterATS5=n ATSFDL=? Atsfdl Enter Firmware Download ModeAtsfdl Appendix Restricted access to SIM data after SIM PIN authentication Imei OK Star-Hash *# Network CommandsSee AT+CLIR FAX SMS SMS+FAX Star-Hash Command Response Parameters Available AT Commands and Dependency on SIM PIN AT+ILRR AT+IPR AT+CMUX Atstpb ATO AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FTH AT+FTM AT+FTS Atsrsm Atsbv Atsctm Atssync Atsspi AT\Q AT&C AT&D AT&S ATE AT+ICF AT+IFC Atdi Atdl ATH AT+CHUP Atshup ATS0 ATS6 ATS7 ATS8 ATS10 ATO AT+CHLD AT+CLIP AT+CLIR AT+COLP AT+CPUC AT+CSSN AT+CUSD AT+FRM AT+FRS AT+FTH AT+FTM AT+FTS Atsrsa Atsrsm AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi AT Command Settings storable with AT&W Mode, mt, bm, ds ServiceShow ATS0 Atslcc AT+CR Factory Default Settings Restorable with AT&F Service=0 Service=3ConnectionState=0, delayOne=0, delayTwo=0 View=0, line=1 ATS3 Summary of Unsolicited Result Codes URC +CGREG stat Smgo mode+CMT oa, scts, tooa, fo, pid, dcs, sca, tosca LengthCRLFdata Sctmb m Sctma m AT Command Usability for USB ATDmemn ATDn ATDstr TC63ATCV00.490 491 24/05 Confidential / Draft Do not copy ATD*99# ATD*98# AT+CRSM Atsxsm Atscks Atsset Atscid AT+CXXCID AT+CCLK AT+CALA Atsbc Atsbv Atsctm Atssync Atsspi Alphabetical List of AT Commands AT+CMGC Restricted SIM Access Atsics ATDmemn ATD*99# ATI