TC63 AT Command Set

4.7 AT+IFC

s

Notes

When using XON/XOFF flow control (AT+IFC=1,x or AT+IFC=3,x) in data mode, +++ should not be used while the data transmission is paused with XOFF. Before entering the command mode with +++ the paused transmission should be resumed using the XON character.

For compatibility reasons, the AT+IFC command can be used in Multiplex mode, though the settings will not take effect. However, be aware that whenever you use the AT+IFC write command in Multiplex mode and then save the current configuration to the user profile with AT&W, the changed AT+IFC setting will become active after restart.

TC63_ATC_V00.490

Page 97 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 97
Image 97
Siemens manual TC63 AT Command Set