TC63 AT Command Set

13.17 AT+CSMS

s

<bm>(num)

Broadcast Type Messages:

 

0

Type not supported

1

Type supported

Notes

If CSMS mode is switched from Phase 2+ to Phase 2 and one or more AT+CNMI Parameter are Phase 2+ specific a '+CMS ERROR: unknown error' will appear. It is recommended to switch the AT+CNMI Parameters to Phase 2 specific values before entering Phase 2.

Phase 2+ (<service>=1) must be set before the following features can be used:

-Configuring procedures for indicating received short messages with the AT+CNMI parameters <mt>=2 or

<mt>=3 and <ds>=1.

-Acknowledging incoming short messages with AT+CNMA.

-Receiving Status Reports and acknowledging them with AT+CNMA.

TC63_ATC_V00.490

Page 348 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 348
Image 348
Siemens TC63 manual Bmnum