Siemens TC63 manual Atspic Display PIN counter, Atspic=?, Atspic?

TC63 AT Command Set

5.3 AT^SPIC

s

5.3AT^SPIC Display PIN counter

The AT^SPIC command can be used to find out whether the ME is waiting for a password and, if so, how many attempts are left to enter the password.

The execute command returns the number of attempts still available for entering the currently required password, for example the PIN, PUK, PH-SIM PUK etc.

The read command AT^SPIC? indicates which password the number of attempts stated by the execute com- mand actually refers to. Also, the write command may be used to query the counter for a specific password: It indicates the number of attempts still available for entering the password identified by <facility>, for example the PIN, PIN2, PH-SIM PIN etc.

To check whether or not you need to enter a password use the read commands AT+CPIN?, AT+CPIN2? and AT^SPIC?. If the response to AT+CPIN? is "READY" the counter of the execute command AT^SPIC relates to PIN2. See last example. If the responses to AT+CPIN? and AT+CPIN2? both read "READY", no password is currently required, and the referrer of the execute command AT^SPIC is explicitly undefined.

Syntax

Test Command

AT^SPIC=?

Response(s)

OK

Read Command

AT^SPIC?

Response(s)

^SPIC: <code>

OK

Exec Command

AT^SPIC

Response(s)

^SPIC: <counter>

OK

Write Command

AT^SPIC=<facility>

Response(s)

^SPIC: <counter>

OK

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<counter>(num)

Number of attempts left to enter the currently required password. This number will be counted down after each failure.

TC63_ATC_V00.490	Page 114 of 501	5/24/05
Confidential / Draft - Do not copy