TC63 AT Command Set

14.3 AT^SCKS

s

14.3AT^SCKS Query SIM and Chip Card Holder Status

This command controls the SIM connection presentation mode and queries the connection status of the SIM and the card holder tray of the TC63.

The query can be used for the locally attached and remote SIM's as well. For details regarding Remote SIM Access refer to AT^SRSA.

Syntax

Test Command

AT^SCKS=?

Response(s)

^SCKS:(list of supported <mode>s)

OK

Read Command

AT^SCKS?

Response(s)

^SCKS: <mode>, <SimStatus>

OK ERROR

+CME ERROR: <err>

Write Command

AT^SCKS=<mode>

Response(s)

OK ERROR

+CME ERROR: <err>

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Unsolicited Result Code

^SCKS: <SimStatus>

During startup, and if the TC63's SIM connection status has changed an unsolicited result code (URC) is issued.

Command Description

The read command returns the URC presentation mode and the status of the SIM card connection.

The write command enables or disables the presentation of URCs to report whether or not the SIM card is con- nected.

If the ME is powered down or reset (AT+CFUN or AT^SMSO) the current presentation mode setting <mode> will not be retained. Therefore the setting <mode>=1 needs to be restored after power on the TC63 or may be saved in the user profile (AT&W).

Parameter Description

<mode>(num)(&W)(&V)

0(&F)

Suppress unsolicited result codes

1

Output unsolicited result codes

TC63_ATC_V00.490

Page 368 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 368
Image 368
Siemens TC63 manual Atscks Query SIM and Chip Card Holder Status, Atscks=?, Atscks?, Scks mode, SimStatus, Scks SimStatus