Siemens TC63 manual 14 AT+CPOL Preferred Operator List, At+Cpol=?, At+Cpol?

TC63 AT Command Set

8.14 AT+CPOL

s

8.14AT+CPOL Preferred Operator List

The AT+CPOL read command returns the list of the preferred operators. The AT+CPOL write command allows to edit the list of the preferred operators. If <index> is given but <operator> is left out, the entry is deleted. An operator can be only once in the list.

Syntax

Test Command

AT+CPOL=?

Response(s)

+CPOL:(list of supported <index>s), (list of supported <format>s)

OK ERROR +CME ERROR

Read Command

AT+CPOL?

Response(s)

+CPOL: <index>, <format>, <operator>

+CPOL: ...

OK ERROR +CME ERROR

Write Command

AT+CPOL=<index>[, <format>, <operator>]

Response(s)

OK ERROR +CME ERROR:

Reference(s)

GSM 07.07

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

% % % % % % % ! % !

Parameter Description

<index>(num)

The order number of the operator in the SIM preferred operator list.

<format>(num)

2 Numeric format

<operator>(str)

Operator in numeric format (GSM Location Area Identification number which consists of a 3-digit country code plus a 2- or 3-digit network code).

TC63_ATC_V00.490	Page 204 of 501	5/24/05
Confidential / Draft - Do not copy