Siemens TC63 manual Atsgconf Configuration of Gprs related Parameters, Atsgconf=?, Atsgconf?

TC63 AT Command Set

11.16 AT^SGCONF

s

11.16AT^SGCONF Configuration of GPRS related Parameters

Syntax

Test Command

AT^SGCONF=?

Response(s)

^SGCONF: (list of supported <llc_pdu_length_U>s), (list of supported <llc_pdu_length_I>s), (list of supported <GPRS msclass>es)

OK

Read Command

AT^SGCONF?

Response(s)

^SGCONF: <llc_pdu_length_U>, <llc_pdu_length_I>, <GPRS msclass>

OK

Write Command

AT^SGCONF=[<llc_pdu_length_U>][, [<llc_pdu_length_I>][, [<GPRS msclass>]]]

Response(s)

OK ERROR +CME ERROR

Reference(s)

SIEMENS

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % % % % % % ! % !

Parameter Description

<llc_pdu_length_U>(num)

The maximum number of octets in an information field of Unnumbered (U) frames.

0	no negotiation with network (500 will be used)
140...1520(P)	lower values diminish performance

<llc_pdu_length_I>(num)

The maximum number of octets in an information field of Combined Information (I) frames.

0	no negotiation with network (500 will be used)
140...1520(P)	lower values diminish performance

<GPRS msclass>(num)

GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR: operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test command. The value set is volatile and powerup value is the maximum allowed.

Notes

•+CME ERROR: invalid index: Parameter is out of range

•+CME ERROR: operation temporary not allowed: The command is blocked as long as GPRS is already in use (as long as mobile is GPRS attached).

•Writing to user profile with AT&W and restoring with AT&F are not supported.

TC63_ATC_V00.490	Page 302 of 501	5/24/05
Confidential / Draft - Do not copy