Siemens TC63 manual At+Cpbs?, +Cpin Ph-Net Puk

TC63 AT Command Set

5.8 AT^SCSL

s

Examples

EXAMPLE 1

Prerequisite for using the AT^SCSL command is a valid "CM" password created with AT^SPWD. Therefore, first check the "CM" password. A more detailed example can be found in Section 5.7, AT^SPWD.

AT^SPWD="CM",,	Check that the "CM" password was already set.
OK	Yes, the "CM" password is valid.

EXAMPLE 2

To check, configure and remove a "PN" lock (= Customer SIM Lock):

AT^SCSL="PN",2,44444444	Check the current status of the Customer SIM Lock.
^SCSL:	44444444 is the "CM" password created with
	AT^SPWD.
	Operator list is still empty, Customer SIM Lock has
	not yet been set.
OK
AT^SCSL="PN",1,44444444,12345678,262.01:2	Set a "PN" Lock, where 44444444 = "CM" password,
62.02	12345678 = PH-NET PUK, 262.01 = MCC/MNC of
	German operator T-Mobile D and 262.02 = MCC/
	MNC of Vodafone D2.
OK
AT^SCSL="PN",2,44444444	Check again.
^SCSL: 262.01:262.02	The mobile is locked to the two network operators T-
	Mobile D and Vodafone D2.
OK
AT^SCSL="PN",1,44444444,12345678,262.03	Add another operator (262.03 = MCC/MNC of Ger-
	man network operator E-Plus).
OK
AT^SCSL="PN",1,44444444,11223344,262.04	Add another operator. In this case, a new PH-NET-
	PUK was used. Keep in mind that the new password
	overwrites the old one.
OK
AT^SCSL="PN",0,44444444	Remove the Customer SIM Lock. Keep in mind that
OK	this action deletes the entire list of network operators
	contained in <data>. As a result, the mobile will
	accept any SIM card.

EXAMPLE 3

If the Customer SIM Lock is active, but the user inserts a different SIM card not supported by the list of oper- ators defined in <data> the <PUK> must be at hand:

AT^SCSL="PN",2,44444444	For the purpose of this example, we check the cur-
^SCSL: 262.01:262.02	rent status of the Customer SIM Lock.
	The mobile lis locked to the German operators T-
	Molile D and Vodafone D2.
OK
AT+CPIN=1111	PIN1 is accepted and the mobile is operable, except
	for SIM related AT commands.
OK
AT+CMGF=1	AT command that does not require SIM authentica-
	tion.
OK
AT+CPBS?	Attempt to use a phonebook command.
+CME ERROR: network personalisation PUK	Access to phonebook fails because of lack of SIM
required	data.
AT+CPIN?	Check status of PIN authentication.
+CPIN: PH-NET PUK	The mobile is waiting for the PH-NET-PUK.
OK

TC63_ATC_V00.490	Page 132 of 501	5/24/05
Confidential / Draft - Do not copy