TC63 AT Command Set

7.17 ATO

s

7.17ATO Switch from command mode to data mode / PPP online mode

Syntax

Exec Command

ATO[<n>]

Response(s)

If connection is not successfully resumed:

NO CARRIER

or

TA returns to data mode from command mode

CONNECT <text>

Note: <text> output only if ATX parameter setting with value > 0.

Reference(s)

V.250

PIN ASC0 ASC1 USB MUX1 MUX2 MUX3 Charge 4 Last

! % § % % ! ! ! ! !

Command Description

ATO is the corresponding command to the +++ escape sequence: When you have established a CSD call or a GPRS connection and TA is in command mode, ATO causes the TA to resume the data or GPRS connection and takes you back to data mode or PPP online mode.

Parameter Description

<n>(num)

[0]

Switch from command mode to data mode

TC63_ATC_V00.490

Page 159 of 501

5/24/05

Confidential / Draft - Do not copy

 

 

Page 159
Image 159
Siemens TC63 manual ATO Switch from command mode to data mode / PPP online mode, ATOn